You might take a look at VisualCADCAM from Mecsoft. Lathe CAM (VisualTurn) is now included in the Visualmill CAM package, and if there isn't a post already made for your machine, Mecsoft will configure one for free with your purchase.
I am ;looking for some cam software that will work with my 1999 Mori Sieki SL-150 lathe with live tooling Fanuc 18i controller. Any suggestions would be much appreciated
Ray
Similar Threads:
You might take a look at VisualCADCAM from Mecsoft. Lathe CAM (VisualTurn) is now included in the Visualmill CAM package, and if there isn't a post already made for your machine, Mecsoft will configure one for free with your purchase.
[FONT=Verdana]Andrew Werby[/FONT]
[URL="http://www.computersculpture.com/"]Website[/URL]
Every software will work ok with Fanuc. Find one that would be most comfortable to use for You.