GSimple (Free 3 Axis CAM) Version 1.08 - Page 6


Page 6 of 6 FirstFirst ... 3456
Results 61 to 72 of 72

Thread: GSimple (Free 3 Axis CAM) Version 1.08

  1. #61
    Registered
    Join Date
    Feb 2007
    Location
    Greece
    Posts
    41
    Downloads
    0
    Uploads
    0

    Default

    Version 2.04 will be out in about a couple of weeks. The major improvement over the last version is the inch mode -it has been redisigned and the old problems (small deviations in the data) have been eliminated. Version 2.04 is currently in the debug state.



  2. #62
    Registered
    Join Date
    Feb 2007
    Location
    Greece
    Posts
    41
    Downloads
    0
    Uploads
    0

    Default GSimple Version 2.04

    At last the new version is out and can be downloaded at http://www.gsimple.eu

    The installation method has been changed completely and there is also a new users manual which is (almost) complete.



  3. #63
    Registered
    Join Date
    Aug 2009
    Location
    USA
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default

    Hello to any g-simple users. I am looking to see if anyone has set up g-simple with a bridgeport set with sx15. I am looking for a config file or how to set up the config file for a bridgeport. Thank you in advance.



  4. #64
    Registered
    Join Date
    Jul 2007
    Location
    usa
    Posts
    8
    Downloads
    0
    Uploads
    0

    Default

    When will there be another update?
    I still use 2.03 the later ones had problems in INCH mode.



  5. #65
    Registered
    Join Date
    Dec 2008
    Location
    Colombia
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default

    Hi Sotiris: I am learning how to use your program and I have to say it is great. Congratulations!!! Gsimple works very well creating the g-code in my pieces. I will try to cut some of them soon. I will be reporting my adventure. Thanks a lot!!!!



  6. #66
    Registered
    Join Date
    Dec 2009
    Location
    USA
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default

    When I go to make the g code I come up with the error of: No engraving tool present for text ID 2. I have added the tools under the Tools tab and in the setup and still come up with the same error. Is there a tutorial that expands about engraving and the setup?



  7. #67
    Registered
    Join Date
    Feb 2010
    Location
    US
    Posts
    61
    Downloads
    0
    Uploads
    0

    Default

    Can I not snap to an object to select line ends? Snap is on, all selections in snap options are turned on. I would think selecting LINE would allow a "pick" feature or something other than coordinates. Coordinates will be awful slow, error ridden drawing methods.



  8. #68
    Registered
    Join Date
    Feb 2010
    Location
    US
    Posts
    61
    Downloads
    0
    Uploads
    0

    Default

    oops.

    Last edited by Doggitter; 10-15-2012 at 11:42 PM.


  9. #69
    Registered TheJollyMiller's Avatar
    Join Date
    Dec 2013
    Location
    Preston
    Posts
    23
    Downloads
    0
    Uploads
    0

    Default

    I would just like to say that Gsimple is a brilliant programme and that it has helped me enormously in coming to terms with G-Code.

    I have used it to make quite complicated parts and once you have found all the wrinkles it is a very powerful tool.

    I use it to produce G-Code for my Denford Novamill that is running on Mach3.



  10. #70
    Registered TheJollyMiller's Avatar
    Join Date
    Dec 2013
    Location
    Preston
    Posts
    23
    Downloads
    0
    Uploads
    0

    Default Gsimple is great

    Attachment 261559

    OOPS!

    Double post. So I will give you a picture. ;-)



  11. #71
    Registered
    Join Date
    Jul 2009
    Location
    USA
    Posts
    49
    Downloads
    0
    Uploads
    0

    Default Re: GSimple Version 2.04

    S.Kontogiannis,

    Where has the gsimple download been moved to? The stated URL does not download.



  12. #72
    Member
    Join Date
    Aug 2013
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Re: GSimple Version 2.04

    Quote Originally Posted by keith20mm View Post
    S.Kontogiannis,

    Where has the gsimple download been moved to? The stated URL does not download.
    Yes I was wondering thos as well I would like to use this program does anyone have a link where I could download it?



Page 6 of 6 FirstFirst ... 3456

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

GSimple (Free 3 Axis CAM) Version 1.08

GSimple (Free 3 Axis CAM) Version 1.08

GSimple (Free 3 Axis CAM) Version 1.08