You need to surface it with the machine.
The issue;
Assuming that our current spoil board set up is inconsistent as far as even level goes, and as a result the bit drags when it travels around the stock. So its cutting lines 1/4 in deep or so where it travels.
https://i.imgur.com/yAyVSxD.jpg
I raised the 0 a little bit but wouldn't raising the 0 also alter the depth of my passes?
What are some more reliable solutions for spoil board accuracy? Is there something we can do that will alleviate some of the inconsistencies?
Similar Threads:
- Need Help!- spoil board help!
- Need Help!- Spoil Board
- spoil board
- Spoil board
- Newbie- Spoil Board
You need to surface it with the machine.
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)