@akcnez
I had the impression that there was no interest in "Smart saw" so far, so I didn't include it in the new versions.
Let me know if you have a concrete use case for it. Then I can check again if it is usable for it.
@Yvzylmz
Please have a look at the current version V4.1.7.
After starting the program you can load a DXF file via the menu or simply with Drag&Drop. When loading, the job whose name starts with a "#" is automatically started.
The GCode is also calculated immediately. You do not have to set a "Zero Point" ! Also if you chhange the start diameter, everything is now automatically recalculated.
Then you open the postprocessor window and copy the GCode into a file and load it into your controller.
Where exactly is your problem ? I don't have Mach3 and I don't know it. So you have to describe me in detail what is not working. Otherwise I can not help you
@Armando
The 3D jobs that are currently available are not intended for objects like the one you used.
I am confident that soon I will be able to show a video that explains how to use the 3D jobs.
@erdinc_eroglu
Sorry, but I have only used Mega-5x with 5 axes.
I do not know a controller with 6 or 7 axes.