GrblGru: Free CAM and 3D-Simulation for mills and lathes - Page 15


Page 15 of 15 FirstFirst ... 512131415
Results 169 to 172 of 172

Thread: GrblGru: Free CAM and 3D-Simulation for mills and lathes

  1. #169
    Registered
    Join Date
    May 2016
    Posts
    94
    Downloads
    1
    Uploads
    0

    Default Re: GrblGru: Free CAM and 3D-Simulation for mills and lathes

    Thanks for the info. I will have a look at it.

    I will definitely continue to work on the control of the rotary axis. It offers so many possibilities, especially in combination with a small grinding unit.



  2. #170
    Registered
    Join Date
    May 2016
    Posts
    94
    Downloads
    1
    Uploads
    0

    Default Re: GrblGru: Free CAM and 3D-Simulation for mills and lathes

    Release note GrblGru V3.32

    Unfortunately I haven't been able to document the improvements and innovations made to the GrblGru program lately.
    In order to reduce this backlog a little, I would like to introduce the new functions chamfering and thread whirling to you today.

    While thread whirling of internal threads is well known, the possibility of producing external threads is rather unknown.
    In this little video I would like to show you how to make a screw (made of styrofoam) and a nut.

    Up to now I have always been of the opinion that thread whirling could only be used for special cases due to the relatively high costs of the tool.
    But after I made good experiences with the production of thread whirlers from old taps from the scrap crate,
    I will be considering this procedure more frequently in the future.

    Free download, as usual from my dropbox bit.ly/2xF1KJ8_GrblGru_Release

    Have fun with GrblGru





  3. #171
    Gold Member Khalid's Avatar
    Join Date
    Apr 2006
    Location
    Pakistan
    Posts
    3464
    Downloads
    0
    Uploads
    0

    Default Re: GrblGru: Free CAM and 3D-Simulation for mills and lathes

    Awesome work u r doing man.. I like the way you made ur own tool...

    http://free3dscans.blogspot.com/ http://my-woodcarving.blogspot.com/
    http://my-diysolarwind.blogspot.com/


  4. #172
    Registered
    Join Date
    May 2016
    Posts
    94
    Downloads
    1
    Uploads
    0

    Default Re: GrblGru: Free CAM and 3D-Simulation for mills and lathes

    @Khalid
    Thanks a lot



Page 15 of 15 FirstFirst ... 512131415

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

GrblGru: Free CAM and 3D-Simulation for mills and lathes

GrblGru: Free CAM and 3D-Simulation for mills and lathes