6/1,Blk # A, Lalmatia,Mohammadpur,Dhaka 1207,Bangladesh
Posts
4
Downloads
0
Uploads
0
Please help me out with the line : G450 CFTCP
Dear GURUs,
Pls help me out about the line given in the subject above.
Its an initial line from a "Milling a bearing plate" program used in the Siemens control : SINUMERIK 840D/810D.
And pls dont give the explanation by simply stating :
G450 > Traversing along contour corners in a circular path
CFTCP > Constant Feed in Tool Centre Point
Its all written out there in the manuals.But as I'm a newbie with no one around here to help me guide to get rid of my static inertia I'd highly appreciate some detailed explanation preferably with a sketch.
And Steve from CA is very expected to give a useful reply.