Look for a setting that says something like Arc Center Mode. When that is set incorrectly or doesn't agree with the G code it can cause the circles that you are seeing.
Hi , i wanted to the dxf file attached to be cutted, but cnc operator said there are random circles on drawing as also shown in the pic. I have drawn it myself but i can not see any error on the drawing and as i can't see the problem , i am not able to fix this. If anyone has any idea what causes this, please help me! Thank you.
Similar Threads:
Look for a setting that says something like Arc Center Mode. When that is set incorrectly or doesn't agree with the G code it can cause the circles that you are seeing.
Jim Dawson
Sandy, Oregon, USA
hy may be an arch orientation conflict, like clocwise vs trig ...
we are merely at the start of " Internet of Things / Industrial Revolution 4.0 " era : a mix of AI, plastics, human estrangement, powerful non-state actors ...