Cadcode
Hi,
Trying to solve a problem we have...
We laser cut 1000s of parts on pre-nested sheets, but a lot of these sheets contain parts we don't need, so they go on the shelf to hopefully be sold at some point.
I want to switch our method up and invest in some automated nesting software, so that we cut only what we need, but can't seem to find the right one.
Basically want I want to be able to do is create a CSV file which has exported data from our webstore that contains the name, colour and thickness (acrylic), quantity and a path to that shapes dxf.
Ideally then it would import into the software the DXFs and organize sheets based on the colour and thickness and then multiply the parts by the correct quantity required.
Has anyone come across this type of program? If you have experience in this field, I'd be happy to chat about creating something or getting setup in someway on the right path..
Similar Threads:
Cadcode
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Unfortunately I have had no reply from them NestFab however has replied
hy big, i can help you with a custom application if you wish / kindly
we are merely at the start of " Internet of Things / Industrial Revolution 4.0 " era : a mix of AI, plastics, human estrangement, powerful non-state actors ...