DXF Files Needed - Subaru Strut Spacers


Results 1 to 7 of 7

Thread: DXF Files Needed - Subaru Strut Spacers

  1. #1

    Default DXF Files Needed - Subaru Strut Spacers

    I've searched the internet high and low for these files and have not been able to find them.I have measurements but don't have the skill to design the CAD. Is there anyone that can help?

    Similar Threads:


  2. #2
    Member jalessi's Avatar
    Join Date
    Feb 2007
    Location
    United States
    Posts
    4553
    Downloads
    1
    Uploads
    0

    Default Re: DXF Files Needed - Subaru Strut Spacers

    Broknindarkagai,

    Post a sketch with dimensions, or a picture if possible.

    Jeff...

    Patience and perseverance have a magical effect before which difficulties disappear and obstacles vanish.


  3. #3

    Default Re: DXF Files Needed - Subaru Strut Spacers

    I am trying to make something like the last image. I'm using 2 inch thick HDPE to make 2 inch spacers. Thank you Jeff!

    Note : Measurements are in inches

    Rear Strut Spacer
    DXF Files Needed - Subaru Strut Spacers-rear-jpg

    Front Strut Spacer
    DXF Files Needed - Subaru Strut Spacers-front-jpg

    Example of finished product
    DXF Files Needed - Subaru Strut Spacers-img00365-jpg

    Last edited by broknindarkagai; 08-28-2014 at 03:55 PM.


  4. #4
    Registered
    Join Date
    Jun 2008
    Location
    USA
    Posts
    562
    Downloads
    0
    Uploads
    0

    Default Re: DXF Files Needed - Subaru Strut Spacers

    Here you go.

    Mike

    Attached Files Attached Files


  5. #5

    Default Re: DXF Files Needed - Subaru Strut Spacers

    I'm sorry I should have been more clear. I'm need 3D models. I'm running a Roland MDX-20



  6. #6
    Registered
    Join Date
    Jun 2008
    Location
    USA
    Posts
    562
    Downloads
    0
    Uploads
    0

    Default Re: DXF Files Needed - Subaru Strut Spacers

    Here is the 3D model in Solidworks format. You have to double check model, I am not responsible for dimensional accuracy
    Good Luck

    Mike

    Attached Files Attached Files


  7. #7
    *Registered User* paulitu's Avatar
    Join Date
    Nov 2018
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: DXF Files Needed - Subaru Strut Spacers

    Quote Originally Posted by Mike 1948 View Post
    Here you go.

    Mike
    Hi Mike, thank you for the file. This is the front one, correct?

    Does anyone have the rear spacer?

    Thank you,



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

DXF Files Needed - Subaru Strut Spacers

DXF Files Needed - Subaru Strut Spacers