Reply with QuoteSomebody is not following the .dxf spec. do you have a copy of Rhino or something else that can open it?
DXF problem Acad2006
I have some DXF files sent, one is 3D does not want to open, the message Unknown value in AC1021?
Anyone have any ideas.
Al.
Similar Threads:
CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
Re: DXF problem Acad2006
Somebody is not following the .dxf spec. do you have a copy of Rhino or something else that can open it?
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Re: DXF problem Acad2006
I see by other forums AC1021 indicates it originated from a later version of Autocad.
I tried my trusty convertor using DWG and DXF destination for 2006 and did not work?
I don't have any other Cad software.
Al.
CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
Re: DXF problem Acad2006
did a search for DXF format versions....can up with this link to a autodesk forum post
a couple of convertor links
Teigha
http://autocad-drawing-file-version-...r.winsite.com/
Re: DXF problem Acad2006
AC1021 = AutoCAD 2007
AutoCAD is very picky about the .dxf file format, and often won't open files that other applications will. I've always found that Rhino would usually open any .dxf's that AutoCAD would not, but I don't have a copy installed right now.
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Posting Permissions
