Need Help! Hello, can you help me with HP UHU BOARD

Results 1 to 7 of 7

Thread: Hello, can you help me with HP UHU BOARD

  1. #1
    Registered
    Join Date
    Aug 2014
    Posts
    17
    Downloads
    0
    Uploads
    0

    Question Hello, can you help me with HP UHU BOARD

    I'm looking urgently

    I have been for a while looking for REAL HP UHU BOARD kit!


    Have been in contact with Paul & Mr. Kreutz, but That report themelves absent.
    And have had contact with Henrik Olsson-which lapels me to you.




    You are my last hope


    do you know where I have a REAL HP - UHU BOARD or kits can purchasePlease


    Hoping for a speedy mail


    Thank you to help me


    Yours sincerely


    PIERAERD Frederik


    Email = pieraerd.frederik@gmail.com


    PS MITSUBISHI MOTORS SERVO


    1.1 Kw DC Brush / 180 VOLT Nominal 11 amps peak 67 amperes

    Similar Threads:


  2. #2
    Member
    Join Date
    Aug 2006
    Location
    USA
    Posts
    2758
    Downloads
    0
    Uploads
    0

    Default Re: Hello, can you help me with HP UHU BOARD

    Hello;

    I am sorry for the delay, I seldom read the posts on this forum anymore because of the lack of free time. If you are still interested in the HP-UHUs I could email you the Gerber and NC drill files so you can order the PCBs from a PCB manufacturing facility and make your own drives using the part lists already on the forum. Henrik can probably sell you the CPU modules for high pulse/rev encoders or you can get the original UHU chips from Uli.

    Best regards,

    kreutz



  3. #3
    Member
    Join Date
    Dec 2005
    Location
    CANADA
    Posts
    231
    Downloads
    4
    Uploads
    0

    Default Re: Hello, can you help me with HP UHU BOARD

    I still have my HP UHU boards. Still have plans to use them. So many projects. So little time. Does Henrik still sell the CPU modules?



  4. #4
    Member
    Join Date
    Aug 2006
    Location
    USA
    Posts
    2758
    Downloads
    0
    Uploads
    0

    Default Re: Hello, can you help me with HP UHU BOARD

    I am pretty sure he is still selling them...

    Regards,

    kreutz



  5. #5
    Registered
    Join Date
    May 2008
    Location
    Serbia
    Posts
    0
    Downloads
    0
    Uploads
    0

    Default Re: Hello, can you help me with HP UHU BOARD

    Please send me Gerber and NC drill files

    Thanks

    Yours sincerely

    Dusan Zdravkovic

    dusanz977@gmail.com



  6. #6
    Registered
    Join Date
    May 2008
    Location
    Serbia
    Posts
    0
    Downloads
    0
    Uploads
    0

    Default Re: Hello, can you help me with HP UHU BOARD

    Please send me Gerber and NC drill files.

    Thanks,
    yours sincerely

    Dusan Zdravkovic
    dusanz977@gmail.com



  7. #7
    Member
    Join Date
    Dec 2005
    Location
    CANADA
    Posts
    231
    Downloads
    4
    Uploads
    0

    Default Re: Hello, can you help me with HP UHU BOARD

    Have you a current email for Henrik?
    John
    johnd@autoartisans.com



  8. #8
    Member
    Join Date
    Dec 2009
    Location
    Australia
    Posts
    166
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by kreutz View Post
    Hello;

    I am sorry for the delay, I seldom read the posts on this forum anymore because of the lack of free time. If you are still interested in the HP-UHUs I could email you the Gerber and NC drill files so you can order the PCBs from a PCB manufacturing facility and make your own drives using the part lists already on the forum. Henrik can probably sell you the CPU modules for high pulse/rev encoders or you can get the original UHU chips from Uli.

    Best regards,

    kreutz
    Hi could you send me the Gerber and drill files Thanks
    squirrel@thekis.com.au
    cheers



  9. #9
    LouisNeyens's Avatar
    Join Date
    Oct 2019
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default

    Hello,

    I am 18 years old and intrested in cnc electronics, automation and metal working.
    I am not really advanced in electronics. I have made some usefull arduino projects such as a arduino controlled lengt stop (like a tigerstop) for my bandsaw. The positioning sytems i made before were with steppers. I recently bought a gecko gx320 drive, wich works really well for smaller dc servo's.
    Now i want to controll something bigger with a hp-uhu.
    I want to build my own uhu drives. But it is hard to find up to date info,scematics and source code about the drive.
    Are there still cpu modules available? Or is it possible to program them yourself?
    Can someone supply me the current scematics, gerber files and parts list for the hp-uhu.
    Any help would be greatly apreciated.

    Kind regards from Belgium
    Louis Neyens
    Email: neyens.louis@gmail.com



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Hello, can you help me with HP UHU BOARD

Hello, can you help me with HP UHU BOARD