MCS Z-axis safety level in NX Cam


Results 1 to 1 of 1

Thread: MCS Z-axis safety level in NX Cam

  1. #1
    Member
    Join Date
    Oct 2017
    Location
    Afghanistan
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default MCS Z-axis safety level in NX Cam

    Hello guys,
    I want to add the radius safety level I wrote in MCS to the end of all operations. I used the mom_mcs_goto(2) variable but it wasn't enough. What codes should I write so that I can print this value in MCS at the end of the operation?


    MCS Z-axis safety level in NX Cam-retract-1-jpgMCS Z-axis safety level in NX Cam-retract-2-jpeg

    Similar Threads:
    Attached Thumbnails Attached Thumbnails MCS Z-axis safety level in NX Cam-retract-1-jpg   MCS Z-axis safety level in NX Cam-retract-2-jpeg  


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

MCS Z-axis safety level in NX Cam

MCS Z-axis safety level in NX Cam