UCCNC Runs in DEMO Mode when it cannot talk to the Motion Controller.
Arturo Duncan
https://cnc4pc.com
I have a custom UCCNC screen all set up on my laptop that runs my router out in my shop. Sometimes though I want to edit that custom screen from the comfort of my desk chair in the house.
I have backed up the complete UCCNC directory from the router's laptop onto my desk computer.
When I start UCCNC in DEMO mode at my desk though, no matter which 300ETH option I select, I get the default program screen.
Is there a way to force the software to my custom screen when running n DEMO mode?
Thanks,
BH
Similar Threads:
UCCNC Runs in DEMO Mode when it cannot talk to the Motion Controller.
Arturo Duncan
https://cnc4pc.com
The screenset is specified in the profile you are using. Just edit the screenset name in the .pro file.
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Thanks Gerry. I had tried that but apparently didn't get it done correctly. I'll try again.
BH