My UCCNC Probe Screen version 4 is available now

Results 1 to 4 of 4

Thread: My UCCNC Probe Screen version 4 is available now

  1. #1
    Member
    Join Date
    Apr 2013
    Location
    Sweden
    Posts
    1899
    Downloads
    2
    Uploads
    0

    Default My UCCNC Probe Screen version 4 is available now

    Some years ago I created a screen set to be able to probe in a more user friendly way than it was possible with UCCNC. It contained a special probe screen and some macros. This stopped working some time ago and that happened without me noticing it, because I don't install every version. The problem been pointed out to me by some users, and after verifying I investigated the cause, which turned out to be due to some changes made in the UCCNC software. The reason was that my screen elements collided with some of the newer UCCNC screen elements, so the Probe screen got messed up. This weekend I managed to find time and fix this, so any of you interested in, or using my Probe screen can download the new, version 4 and install it. It has been tested with my UC300ETH 5LPT controller only, since that is the only one I have, but the screen and the functions are completely independent of the controller, so regardless which one you are using, you can download, install and set up for your machine.

    The zipped file contains a user guide also, and that is all the support I am providing. I can not promise any other type of support or help with the installation I made a video some time ago about how to install version 3, and the installation procedure is still the same. The user manual describes the installation, configuration and the use, so if you follow my manual to the letter then you should have no problems. I tested the manual several times, but it is important that it is followed to the letter, otherwise the installation will fail and you have to start over. The Probe screen and the macros don't change any of your UCCNC parameters, so you don't have to worry about that, but it is generally a good practice to take backup before start, so I advise you to do that.

    Watch this video for how to install:



    In the video comments you will see instructions on where to find out more about it.

    The later version of UCCNC contains a probe feature, but personally I prefer my own since I think it is simpler to use and actually fits my needs better.

    Good luck and enjoy.

    Similar Threads:
    https://www.youtube.com/c/AdaptingCamera/videos
    https://adapting-camera.blogspot.com


  2. #2
    Member
    Join Date
    Apr 2013
    Location
    Sweden
    Posts
    1899
    Downloads
    2
    Uploads
    0

    Default Re: My UCCNC Probe Screen version 4 is available now

    I just want to inform you that it's been tested even with UC100 hardware and is working fine. The probe screen and the macros are not dependent on any hardware, so regardless what you are using, you should be fine if you follow my manual to the letter.

    https://www.youtube.com/c/AdaptingCamera/videos
    https://adapting-camera.blogspot.com


  3. #3
    Member
    Join Date
    Jul 2009
    Location
    USA
    Posts
    85
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by A_Camera View Post
    I just want to inform you that it's been tested even with UC100 hardware and is working fine. The probe screen and the macros are not dependent on any hardware, so regardless what you are using, you should be fine if you follow my manual to the letter.
    Thank you

    One of the less intuitive pArts of UCCNC is the probing interface

    Lots of functionality but not super intuitive.

    Duke



  4. #4
    Member
    Join Date
    Apr 2013
    Location
    Sweden
    Posts
    1899
    Downloads
    2
    Uploads
    0

    Default Re: My UCCNC Probe Screen version 4 is available now

    Quote Originally Posted by jduke View Post
    Thank you

    One of the less intuitive pArts of UCCNC is the probing interface

    Lots of functionality but not super intuitive.

    Duke
    You're welcome. I made these initially for my own use a few years ago and at that time UCCNC had no probing, except a very primitive Z height. Now there is one in the software, and I haven't really used it, but had a quick look and I agree, not that intuitive to me, so I will continue using my own.

    https://www.youtube.com/c/AdaptingCamera/videos
    https://adapting-camera.blogspot.com


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

My UCCNC Probe Screen version 4 is available now

My UCCNC Probe Screen version 4 is available now