You could always write down the port and pin numbers used in Mach3, and manually enter them in UCCNC. It's probably only 10-12.
Or UCCNC can import the Mach3 profile, but this can sometimes have some minor issues.
I have a Sherline 5400 CNC mill with a uc100 USB controller. I am wanting to try the UCCNC controller software, does anyone have a working profile for a Sherline mill they could share?
You could always write down the port and pin numbers used in Mach3, and manually enter them in UCCNC. It's probably only 10-12.
Or UCCNC can import the Mach3 profile, but this can sometimes have some minor issues.
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)