Reply with QuoteYou could always write down the port and pin numbers used in Mach3, and manually enter them in UCCNC. It's probably only 10-12.
Or UCCNC can import the Mach3 profile, but this can sometimes have some minor issues.
Looking for UCCNC Software Profile for Sherline Mill ???
I have a Sherline 5400 CNC mill with a uc100 USB controller. I am wanting to try the UCCNC controller software, does anyone have a working profile for a Sherline mill they could share?
Re: Looking for UCCNC Software Profile for Sherline Mill ???
You could always write down the port and pin numbers used in Mach3, and manually enter them in UCCNC. It's probably only 10-12.
Or UCCNC can import the Mach3 profile, but this can sometimes have some minor issues.
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Posting Permissions
