You'd only need to change settings if you wire the VFD to the AXBB using different pins.
I am running my machine (custom built) with UCCNC and the AXBB controller. If I bought a new spindle (different manufacturer), same specs, would it be just plug and play or what configurations would I need to change?
Similar Threads:
You'd only need to change settings if you wire the VFD to the AXBB using different pins.
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)