Reply with QuoteTry asking CNC Room.
Blown UB1
Hello,
I bought a UC300ETH-UB1 and I wanted to connect it to a 24V source, but unfortunately for my stupidity I connected the source badly and I destroyed the first fuse and also the TVS diode on UB1. Can anyone advise me where to get a new TVS2 diode? It says GEZ 7LH73 on it, but I can't find anything like that.
Thank you in advance
Similar Threads:
Re: Blown UB1
Try asking CNC Room.
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Re: Blown UB1
Already did, I have it, thanks guys.
Re: Blown UB1
It's SMCJ24A, a 24V unidirectional TVS diode.
https://www.diodes.com/assets/Datasheets/ds19003.pdf
