The majority of Wizards in Mach3 were written by other users, and donated to the community.
UCCNC does not have the same type of built in "wizard" functionality, but some users have made plugins that can be found on CNC Drives user forum.
I just converted over to the UCCNC controller software using a UC300ETH. Coming from Mach3 I am used to having wizards available for simple tasks that don’t require the whole CAD to CAM to Mill rigmarole.
I see that UCCNC has a Probing screen, but I don’t see any wizards or other conversational programming screens. What am I missing?
Similar Threads:
The majority of Wizards in Mach3 were written by other users, and donated to the community.
UCCNC does not have the same type of built in "wizard" functionality, but some users have made plugins that can be found on CNC Drives user forum.
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)