- Need Help!- UCCNC to AVF 5100 via Modbusez, problems communicating
-
Member
UCCNC to AVF 5100 via Modbusez, problems communicating
Hi
I'm having having troubles configuring my new VFD.
It's a chinese VFD (Avf 5100) controlling my chinese spindle (2,2kw, watercooled, 400Hz, 24 000rpm). I'm using as stated in the title, UCCNC as control software.
I've configured the VFD for RS485 ( I think) and I'm using a serial to RS485 converter that worked perfectly with my old VFD.
I tried alot of different settings in Modbusez (v16) setup. At best the fan starts in the vfd but nothing more.
Attached some pictures of the modbusez settings, a couple of pages from the manual and a pic from the serial communication from one of my tries.
Anyone who can help me? Have run out of ideas now.
Thanks
Similar Threads:
Last edited by Vetsoltech; 03-24-2020 at 04:09 PM.
Reason: wrong pics!
-
-
Member
Re: UCCNC to AVF 5100 via Modbusez, problems communicating
Latest update,
I now can adjust the speed with UCCNC BUT only for a few seconds then the vfd resumes its speed!!!???
Forgot to mention that its hooked up by analog port now...
Last edited by Vetsoltech; 05-07-2020 at 05:13 PM.
- Need Help!- UCCNC to AVF 5100 via Modbusez, problems communicating
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules