nevermind
Similar Threads:
- Australia my AXBB-E and UCSB are on the way, small annoyance is anyone using axbb with mach3?
- Need Help!- Tranlate puls/dir control signals to Step Time, Step Space, Direction Hold (LinuxCNC)
- Need help with Ports & Pins - motors not responding and/or not changing direction
- Problem- KL-600-48 power supply putting out 58 volts!
- Need Help!- Step/Direction pins should be Step FWD and Step BACK
Last edited by Nicksch; 12-08-2019 at 07:36 PM.