- Stepcraft 840 stuck axis limit switch UCCNC issue
-
Member
Stepcraft 840 stuck axis limit switch UCCNC issue
Hi,
I have a Stepcraft-840 which is giving me trouble.
I tried to home the axes.
Y is homed ok.
After I home X, and try to run it at 50% speed to the end of the axis, just to see if it goes back and forth okay, it gets stuck in the middle.
I've triple checked every possible thing I could, including electrical wiring, bolts etc.
The attached is the diagnostics page and error.
Anyone have an idea what I could do?
Thank you!
Similar Threads:
-
- Stepcraft 840 stuck axis limit switch UCCNC issue
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules