I make an macro based on info found here , but i am having an issue , it is working good when i try to use it when a job was done , or a tool change , but if i stop it in middle , and i want to change tool and probe again , it goes straight thru stock material .
I need a litte help here with code, because i don't understand why it is working good when i try to probe first time , and it doesnt work in milling process .
Thanks .
First of all, to get any help at all you MUST tell us what software you are using!
Mach3? Mach4? UCCNC? LinuxCNC? Something else?
It helps know what platform you are running on, and what sort of hardware you have as well.
First i get tool offset with m31 , and it writes on c axis offset .
After i want to change a tool , i use only m200 , but the issue is when i try to use it in a middle of a tool breack or a stop , it doesnt go at measuring point , instead it goes straight thru stock .
If cnc stops for a tool change it works fine .
I think is something about g90 g91 , but i realy dont know , that i want to ask for somme help .
Thanks .