Need help macros probing

Results 1 to 9 of 9

Thread: Need help macros probing

  1. #1
    Member
    Join Date
    Aug 2015
    Posts
    99
    Downloads
    0
    Uploads
    0

    Default Need help macros probing

    I make an macro based on info found here , but i am having an issue , it is working good when i try to use it when a job was done , or a tool change , but if i stop it in middle , and i want to change tool and probe again , it goes straight thru stock material .
    I need a litte help here with code, because i don't understand why it is working good when i try to probe first time , and it doesnt work in milling process .
    Thanks .

    Similar Threads:
    Attached Files Attached Files


  2. #2
    Member
    Join Date
    Jun 2010
    Location
    Australia
    Posts
    3879
    Downloads
    4
    Uploads
    0

    Default Re: Need help macros probing

    First of all, to get any help at all you MUST tell us what software you are using!
    Mach3? Mach4? UCCNC? LinuxCNC? Something else?
    It helps know what platform you are running on, and what sort of hardware you have as well.

    Cheers



  3. #3
    Member
    Join Date
    Aug 2015
    Posts
    99
    Downloads
    0
    Uploads
    0

    Default Re: Need help macros probing

    Thanks , i am using uccnc last version .



  4. #4
    Member
    Join Date
    Apr 2014
    Posts
    57
    Downloads
    0
    Uploads
    0

    Default Re: Need help macros probing

    Which macro do you want to work with? (The 2 macros you uploaded are not the same.)



  5. #5
    Member
    Join Date
    Aug 2015
    Posts
    99
    Downloads
    0
    Uploads
    0

    Default Re: Need help macros probing

    First i get tool offset with m31 , and it writes on c axis offset .
    After i want to change a tool , i use only m200 , but the issue is when i try to use it in a middle of a tool breack or a stop , it doesnt go at measuring point , instead it goes straight thru stock .
    If cnc stops for a tool change it works fine .
    I think is something about g90 g91 , but i realy dont know , that i want to ask for somme help .
    Thanks .



  6. #6
    Member
    Join Date
    Apr 2014
    Posts
    57
    Downloads
    0
    Uploads
    0

    Default Re: Need help macros probing

    I corrected some logical errors, but I'm not by a machine, so I could only test in demo mode. Please, try it and report the results.

    BTW, which last version do you use? (1.2049 stable or 1.2111 development?)

    Attached Files Attached Files


  7. #7
    Member
    Join Date
    Aug 2015
    Posts
    99
    Downloads
    0
    Uploads
    0

    Default Re: Need help macros probing

    Now i use 1.2109 with uc 400eth .



  8. #8
    Member
    Join Date
    Apr 2014
    Posts
    57
    Downloads
    0
    Uploads
    0

    Default Re: Need help macros probing

    The 1.21xx series is in development state, so always use the latest of them. It is now the 1.2111 and you can find and follow it here: forum.cncdrive.com • View topic - UCCNC test releases posted in this thread



  9. #9
    Member
    Join Date
    Aug 2015
    Posts
    99
    Downloads
    0
    Uploads
    0

    Default Re: Need help macros probing

    Thanks , now it works like it should .



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Need help macros probing

Need help macros probing

Need help macros probing