New Machine Build Calibration

Results 1 to 2 of 2

Thread: Calibration

  1. #1
    Activation process Spinweight's Avatar
    Join Date
    Nov 2018
    Posts
    14
    Downloads
    0
    Uploads
    0

    Default Calibration

    I've retrofitted a Gerber Sabre with UC300, UB1, Gecko G320X, UCCNC with Nema 44 servo & AMT102 encoder set at 2048 PPR. My UCCNC profile attached.
    I am losing position accuracy on each of my axis. By the end of the job they have lost accurate location and hit limit switch when going back to zero.
    This is a new build and I've been guessing at my calibration for acceleration, velocity etc.
    Any advice how to calibrate for more accuracy?

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Calibration-uccnc-capture-jpg  


  2. #2
    Member
    Join Date
    Oct 2004
    Location
    United States
    Posts
    228
    Downloads
    0
    Uploads
    0

    Default Re: Calibration

    It can be noise. Or are you seeing the drivers fault and not detecting the fault?

    Arturo Duncan
    https://cnc4pc.com



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Calibration

Calibration