Check the latest (1.2108) test release. It's not recommended for production, but it has a probe screen that does all you need. The next test release is coming soon.
Though about making a 3 axis probe similar to the one shown in the picture. I looked for the macro on the internet and was only able to find a few that worked on other software than UCCNC. Does anyone have a macro for one of these? – Probe z first then move along Y a certain length and lower the bit then go back and probe. Do the same for x axis-
Similar Threads:
Check the latest (1.2108) test release. It's not recommended for production, but it has a probe screen that does all you need. The next test release is coming soon.