Cannot get C22M1 to work with UCCNC

Results 1 to 3 of 3

Thread: Cannot get C22M1 to work with UCCNC

  1. #1
    Registered
    Join Date
    Feb 2013
    Location
    Canada
    Posts
    14
    Downloads
    0
    Uploads
    0

    Default Cannot get C22M1 to work with UCCNC

    Has anyone used the C22M1 modbus mpg interface (from CNC4PC) with UCCNC?? I cannot get this mpg interface to work properly
    I get very unstable jogging with this interface which always ends up with the selected axis in a unstoppable runaway mode until it contacts a limit switch or I hit the reset.
    I am working in inches, I thought maybe there are some settings in UCCNC that need be set for inches but I do not see any settings for this, no settings in the C22M1 plugin either.
    Any ideas or thoughts would be greatly appreciated.

    Similar Threads:


  2. #2
    Member
    Join Date
    Oct 2004
    Location
    United States
    Posts
    307
    Downloads
    0
    Uploads
    0

    Default Re: Cannot get C22M1 to work with UCCNC

    Jim,

    The current configuration support only metric. You are using a setting in imperial. I am creating a new installer for imperial. We have had a rough day here with issues in our website after an update. But we have to have this maybe tomorrow.

    Thanks for you patience.

    Arturo Duncan
    Welcome to CNC4PC



  3. #3
    Registered
    Join Date
    Feb 2013
    Location
    Canada
    Posts
    14
    Downloads
    0
    Uploads
    0

    Default Re: Cannot get C22M1 to work with UCCNC

    What is the status on the installer for imperial??



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Cannot get C22M1 to work with UCCNC

Cannot get C22M1 to work with UCCNC