ver 1.2049. Its set to 2451.everything seems to be functioning correctly in screenset. diagnostic shows the spindle is on, you can vary the rpm with the slider. but the vfd doesn't seem to be getting a signal, its just sitting there flashing
Do you mean the 2017 Screenset? If so, you need to edit the screen and change the RPM field number from 870 to 2451.I’m running screenset and at present I still can’t make this work.
Can you post your profile?
What version of UCCNC, and what version of the plugin?
What RS-485 adapter are you using?
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
ver 1.2049. Its set to 2451.everything seems to be functioning correctly in screenset. diagnostic shows the spindle is on, you can vary the rpm with the slider. but the vfd doesn't seem to be getting a signal, its just sitting there flashing
plugin is hy12
plugin is hy12
[Screensetsettings]
mainscreenfilename=2017
splashscreen=0
[axessettingscontrolX]
Axisenabled=True
Stepportnumber=1
Steppinnumber=2
Steppinnegate=False
Dirpinnumber=3
Dirportnumber=1
Dirpinnegate=False
Enapinnumber=0
Enaportnumber=0
Enapinnegate=False
Limitminuspinnumber=11
Limitminuspinnegate=True
Limitpluspinnumber=11
Limitpluspinnegate=True
Homepinnumber=0
Homepinnegate=False
Homedirectionpositive=False
Homeautozero=True
Homingvalue=0
Homingspeedup=100
Homingspeeddown=250
Stepsperunit=680.73519400953
Velocity=2000
Acceleration=200
Softlimitpositive=0
Softlimitnegative=0
Backlashenable=False
Backlashdistance=0
Slaveaxis=None
Homeportnumber=0
Limitminusportnumber=1
Limitplusportnumber=1
Compaccel=240
[axessettingscontrolY]
Axisenabled=True
Stepportnumber=1
Steppinnumber=4
Steppinnegate=True
Dirpinnumber=5
Dirportnumber=1
Dirpinnegate=True
Enapinnumber=0
Enaportnumber=0
Enapinnegate=False
Limitminuspinnumber=10
Limitminuspinnegate=True
Limitpluspinnumber=10
Limitpluspinnegate=True
Homepinnumber=0
Homepinnegate=False
Homedirectionpositive=False
Homeautozero=True
Homingvalue=0
Homingspeedup=100
Homingspeeddown=250
Stepsperunit=679.11714770798
Velocity=2000
Acceleration=200
Softlimitpositive=0
Softlimitnegative=0
Backlashenable=False
Backlashdistance=0
Slaveaxis=A
Homeportnumber=0
Limitminusportnumber=1
Limitplusportnumber=1
Compaccel=240
[axessettingscontrolZ]
Axisenabled=True
Stepportnumber=1
Steppinnumber=6
Steppinnegate=False
Dirpinnumber=7
Dirportnumber=1
Dirpinnegate=False
Enapinnumber=0
Enaportnumber=0
Enapinnegate=False
Limitminuspinnumber=12
Limitminuspinnegate=True
Limitpluspinnumber=12
Limitpluspinnegate=True
Homepinnumber=0
Homepinnegate=False
Homedirectionpositive=False
Homeautozero=True
Homingvalue=50
Homingspeedup=100
Homingspeeddown=250
Stepsperunit=4040.40404040404
Velocity=352.6875
Acceleration=200
Softlimitpositive=0
Softlimitnegative=0
Backlashenable=False
Backlashdistance=0
Slaveaxis=None
Homeportnumber=0
Limitminusportnumber=1
Limitplusportnumber=1
Compaccel=240
[axessettingscontrolA]
Axisenabled=True
Stepportnumber=1
Steppinnumber=8
Steppinnegate=False
Dirpinnumber=9
Dirportnumber=1
Dirpinnegate=False
Enapinnumber=0
Enaportnumber=0
Enapinnegate=False
Limitminuspinnumber=0
Limitminuspinnegate=False
Limitpluspinnumber=0
Limitpluspinnegate=False
Homepinnumber=0
Homepinnegate=False
Homedirectionpositive=False
Homeautozero=True
Homingvalue=0
Homingspeedup=100
Homingspeeddown=250
Stepsperunit=679.11714770798
Velocity=2000
Acceleration=200
Softlimitpositive=0
Softlimitnegative=0
Backlashenable=False
Backlashdistance=0
Homeportnumber=0
Limitminusportnumber=0
Limitplusportnumber=0
Compaccel=240
[axessettingscontrolB]
Axisenabled=False
Stepportnumber=0
Steppinnumber=0
Steppinnegate=False
Dirpinnumber=0
Dirportnumber=0
Dirpinnegate=False
Enapinnumber=0
Enaportnumber=0
Enapinnegate=False
Limitminuspinnumber=0
Limitminuspinnegate=False
Limitpluspinnumber=0
Limitpluspinnegate=False
Homepinnumber=0
Homepinnegate=False
Homedirectionpositive=False
Homeautozero=True
Homingvalue=0
Homingspeedup=500
Homingspeeddown=250
Stepsperunit=200
Velocity=2000
Acceleration=200
Softlimitpositive=0
Softlimitnegative=0
Backlashenable=False
Backlashdistance=0
Homeportnumber=0
Limitminusportnumber=0
Limitplusportnumber=0
Compaccel=240
[axessettingscontrolC]
Axisenabled=False
Steppinnumber=0
Stepportnumber=0
Steppinnegate=False
Dirpinnumber=0
Dirportnumber=0
Dirpinnegate=False
Enapinnumber=0
Enaportnumber=0
Enapinnegate=False
Limitminuspinnumber=0
Limitminuspinnegate=False
Limitpluspinnumber=0
Limitpluspinnegate=False
Homepinnumber=0
Homepinnegate=False
Homedirectionpositive=False
Homeautozero=True
Homingvalue=0
Homingspeedup=500
Homingspeeddown=250
Stepsperunit=200
Velocity=2000
Acceleration=200
Softlimitpositive=0
Softlimitnegative=0
Backlashenable=False
Backlashdistance=0
Homeportnumber=0
Limitminusportnumber=0
Limitplusportnumber=0
Compaccel=240
[Spindlesetupsettings]
IsSpindleinPWMMode=True
SpindlePWMoutpin=0
SpindlePWMoutpinnegate=False
SpindlePWMdirpin=0
SpindlePWMdirpinnegate=False
SpindlePWMfrequency=200
SpindlePWMminpercent=0
SpindlePWMmaxpercent=100
Spindlesteppin=0
Spindlesteppinnegate=False
Spindledirpin=0
Spindledirpinnegate=False
Spindlestepsperunit=500
Spindleacceleration=200
Spindleminvelocity=6000
Spindlemaxvelocity=24000
Spindlerelaysenabled=True
M3relaypin=0
M3relaypinnegate=False
M4relaypin=0
M4relaypinnegate=False
M3ondelay=3000
M3offdelay=10000
M4ondelay=1000
M4offdelay=3000
Floodmistrelaysenabled=False
M7relaypin=0
M7relaypinnegate=False
M8relaypin=0
M8relaypinnegate=False
M7ondelay=1000
M8ondelay=1000
M9delay=0
SpindlePWMoutport=0
SpindlePWMdirport=0
Spindlestepport=0
Spindledirport=0
M3relayport=0
M4relayport=0
M7relayport=0
M8relayport=0
EncoderApin=0
EncoderAport=0
EncoderBpin=0
EncoderBport=0
Encoderreversedirection=False
EncoderPPR=400
Pulleyratio1=1
Pulleyminvel1=1
Pulleymaxvel1=1
Pulleyinuse=1
Pulleyratio2=1
Pulleyminvel2=1
Pulleymaxvel2=1
Pulleyratio3=1
Pulleyminvel3=1
Pulleymaxvel3=1
Pulleyratio4=1
Pulleyminvel4=1
Pulleymaxvel4=1
Pulleyratio5=1
Pulleyminvel5=1
Pulleymaxvel5=1
Pulleyratio6=1
Pulleyminvel6=1
Pulleymaxvel6=1
Pulleyratio7=1
Pulleyminvel7=1
Pulleymaxvel7=1
Pulleyratio8=1
Pulleyminvel8=1
Pulleymaxvel8=1
Pulleyratio9=1
Pulleyminvel9=1
Pulleymaxvel9=1
Pulleyratio10=1
Pulleyminvel10=1
Pulleymaxvel10=1
Pulleyratio11=1
Pulleyminvel11=1
Pulleymaxvel11=1
Pulleyratio12=1
Pulleyminvel12=1
Pulleymaxvel12=1
Pulleyratio13=1
Pulleyminvel13=1
Pulleymaxvel13=1
Pulleyratio14=1
Pulleyminvel14=1
Pulleymaxvel14=1
Pulleyratio15=1
Pulleyminvel15=1
Pulleymaxvel15=1
Usepulleys=False
[Generalsettings]
Constantvelocitymode=True
Stopatangle=89
Lookaheadlines=300
Softlimitsenable=False
Homesequence1=Z
Homesequence2=X
Homesequence3=Y
Homesequence4=None
Homesequence5=None
Homesequence6=None
Linearerror=0.03
Cornerserror=0.03
USBbuffersize=0.1
POSDROsdigits=4
Doontoolchange=0
MaxLinearaddlenght=1
MaxLinearunificationlenght=2
Kernelfreq=0
SafeZ=25
G73_backoff=0.4
Maximisescreenonstartup=True
Dwellinseconds=False
Runmodewhenunknowngcode=1
Softlimitsgcodeprecheck=False
Precompilemacrosonstartup=False
Arcradiustolerance=0.1
ResetG68onfileload=False
ResetG51onfileload=False
[IOsetupsettings]
Estoppinnumber=15
Estoppinnegate=False
Probepinnumber=0
Probepinnegate=False
Chargepumppinnumber=0
Chargepumppinnegate=False
Chargepumplasermodeon=False
Chargepumpalwayson=False
CurrentHiLopinnumber=0
CurrentHiLopinnegate=False
Indexpinnumber=0
Indexprescaler=1
THCenable=False
THConpin=0
THConpinnegate=False
THCuppin=0
THCuppinnegate=False
THCdownpin=0
THCdownpinnegate=False
THCmin=0
THCmax=10
THCfeed=1000
THCalwayson=False
THCondelay=0
Estopportnumber=1
Chargepumpportnumber=0
CurrentHiLoportnumber=0
Indexportnumber=0
Probeportnumber=0
THConport=0
THCupport=0
THCdownport=0
MPG1pinA=0
MPG1pinB=0
MPG1portA=0
MPG1portB=0
MPG1prescaler=1
MPG1filter=10
MPG1speedmultiplier=10
FROchannel=0
SROchannel=0
JROchannel=0
FROminpercent=0
FROmaxpercent=0
SROminpercent=0
SROmaxpercent=0
JROminpercent=0
JROmaxpercent=0
SPPWMchannel=0
Ana1invarnum=0
Ana2invarnum=0
Ana1outvarnum=0
Ana2outvarnum=0
MPG1attachtoJRO=False
Laseroutputpinnumber=0
Laseroutputportnumber=0
Laseroutputpinnegate=False
THCantidiveenable=False
THCantidivepercent=0
Plasmapierceheight=0
Chargepump2pinnumber=0
Chargepump2portnumber=0
Chargepump2pinnegate=False
Probepin2number=0
Probeport2number=0
Probepin2negate=False
THCdelayenable=False
THCenableoutpin=0
THCenableoutport=0
THCenableoutpinnegate=False
THCantidiveoutpin=0
THCantidiveoutport=0
THCantidiveoutpinnegate=False
THCantidownoutpin=0
THCantidownoutport=0
THCantidownoutpinnegate=False
THCantidownenable=False
Ana3invarnum=0
Ana4invarnum=0
Ana3outvarnum=0
Ana4outvarnum=0
[Appearancesetupsettings]
2DTLCmarker=True
Viewerundonepathcolor=3381759
Viewerdonepathcolor=-5374161
Viewerrapidpathcolor=16711680
ViewerTCPmarkercolor=16776960
ViewerBackgroundcolor=0
Viewerboundariescolor=16777215
GVgcodecolors=16777215
GVmcodecolors=-233
GVscodecolors=-32513
GVfcodecolors=-21931
GVbackgroundcolor=-12698050
GVactualcodecolor=-16777216
GVactualcodemidlinescolor=-16777216
GVnotinterpretedcodecolor=16711680
GVaxiswordcolor=-8323328
GVcoordinatecolor=-9250052
TCPcone=True
TCPcross=False
RotateTCPwithplaneselection=True
Showzeromark=True
Zeromarkcolor=-16711681
DROwarningcolor=-65536
rotationpointmarkcolor=-65536
Showrotationmark=True
Showtoolpathboundaries=True
Highlightcolor=-1
Showmessageonsoftlimits=True
ValidateTextfieldsonEnteronly=True
Disablejogpanelautopopup=False
ShowtoolpathZzeroplate=False
ZplateXextents=100
ZplateYextents=100
ZplateZposition=0
ZplateZpositiononbottom=False
ZplatePlateOpacity=25
ZplateColor=-65536
ZplateXgrid=10
ZplateYgrid=10
ZplateGridOpacity=25
ZplateGridColor=-1
ZplateShowSoftlimits=False
ZplateSoftlimitsColor=-16711936
ZplateSoftlimitsOpacity=100
[Tooltablevalues]
TooloffsetZ0=0
TooloffsetZ1=0
TooloffsetZ2=0
TooloffsetZ3=0
TooloffsetZ4=0
TooloffsetZ5=0
TooloffsetZ6=0
TooloffsetZ7=0
TooloffsetZ8=0
TooloffsetZ9=0
TooloffsetZ10=0
TooloffsetZ11=0
TooloffsetZ12=0
TooloffsetZ13=0
TooloffsetZ14=0
TooloffsetZ15=0
TooloffsetZ16=0
TooloffsetZ17=0
TooloffsetZ18=0
TooloffsetZ19=0
TooloffsetZ20=0
TooloffsetZ21=0
TooloffsetZ22=0
TooloffsetZ23=0
TooloffsetZ24=0
TooloffsetZ25=0
TooloffsetZ26=0
TooloffsetZ27=0
TooloffsetZ28=0
TooloffsetZ29=0
TooloffsetZ30=0
TooloffsetZ31=0
TooloffsetZ32=0
TooloffsetZ33=0
TooloffsetZ34=0
TooloffsetZ35=0
TooloffsetZ36=0
TooloffsetZ37=0
TooloffsetZ38=0
TooloffsetZ39=0
TooloffsetZ40=0
TooloffsetZ41=0
TooloffsetZ42=0
TooloffsetZ43=0
TooloffsetZ44=0
TooloffsetZ45=0
TooloffsetZ46=0
TooloffsetZ47=0
TooloffsetZ48=0
TooloffsetZ49=0
TooloffsetZ50=0
TooloffsetZ51=0
TooloffsetZ52=0
TooloffsetZ53=0
TooloffsetZ54=0
TooloffsetZ55=0
TooloffsetZ56=0
TooloffsetZ57=0
TooloffsetZ58=0
TooloffsetZ59=0
TooloffsetZ60=0
TooloffsetZ61=0
TooloffsetZ62=0
TooloffsetZ63=0
TooloffsetZ64=0
TooloffsetZ65=0
TooloffsetZ66=0
TooloffsetZ67=0
TooloffsetZ68=0
TooloffsetZ69=0
TooloffsetZ70=0
TooloffsetZ71=0
TooloffsetZ72=0
TooloffsetZ73=0
TooloffsetZ74=0
TooloffsetZ75=0
TooloffsetZ76=0
TooloffsetZ77=0
TooloffsetZ78=0
TooloffsetZ79=0
TooloffsetZ80=0
TooloffsetZ81=0
TooloffsetZ82=0
TooloffsetZ83=0
TooloffsetZ84=0
TooloffsetZ85=0
TooloffsetZ86=0
TooloffsetZ87=0
TooloffsetZ88=0
TooloffsetZ89=0
TooloffsetZ90=0
TooloffsetZ91=0
TooloffsetZ92=0
TooloffsetZ93=0
TooloffsetZ94=0
TooloffsetZ95=0
TooloffsetZ96=0
[Workoffset_G54]
WorkoffsetX=0
WorkoffsetY=0
WorkoffsetZ=50
WorkoffsetA=0
WorkoffsetB=0
WorkoffsetC=0
[Workoffset_G55]
WorkoffsetX=0
WorkoffsetY=0
WorkoffsetZ=0
WorkoffsetA=0
WorkoffsetB=0
WorkoffsetC=0
[Workoffset_G56]
WorkoffsetX=0
WorkoffsetY=0
WorkoffsetZ=0
WorkoffsetA=0
WorkoffsetB=0
WorkoffsetC=0
[Workoffset_G57]
WorkoffsetX=0
WorkoffsetY=0
WorkoffsetZ=0
WorkoffsetA=0
WorkoffsetB=0
WorkoffsetC=0
[Workoffset_G58]
WorkoffsetX=0
WorkoffsetY=0
WorkoffsetZ=0
WorkoffsetA=0
WorkoffsetB=0
WorkoffsetC=0
[Workoffset_G59]
WorkoffsetX=0
WorkoffsetY=0
WorkoffsetZ=0
WorkoffsetA=0
WorkoffsetB=0
WorkoffsetC=0
[Machinecoords]
MachinecoordsX=18.190627
MachinecoordsY=-9.13539
MachinecoordsZ=50
MachinecoordsA=0
MachinecoordsB=0
MachinecoordsC=0
[Tooloffsetcoords]
TooloffsetZ=0
[Systemmessages]
Message0=Valid license key was not found! Application will run in demo mode!
Message1=Firmware update done!
Message2=No UC100 connection was found! Application will run in demo mode!
Message3=Firmware update in progress! Please wait and do not close the application...
Message4=The application lost the connection with the motion controller device. [nl] Check the connection. The application is closing now! [nl] Save offsets?
Message5=A machine axis position software limit was reached. The axis was now stopped.
Message6=The reset logic of the software is active! [nl] Remove the reset condition with pressing the blinking reset button on the screen. [nl] If the reset condition cannot be removed can be due to an external e-stop button is pressed in or a limit switch on the machine tool is active. [nl] Please check the Diagnostics page for the input signals condition.
Message7=The current job workspace is out of the set software limits.[nl] Adjust the softlimits to fit the job extents or disable the softlimits.
Message8=The axis is disabled. To calibrate this axis enable the axis first.
Message9=An internal error occured. The application is closing now.
Message10=Enter a valid distance in absolute value!
Message11=The calculated steps per value was saved.
Message12=Please enter valid data.
Message13=Active fixture:
Message14=Are you sure you want to close?
Message15=
Message16=
Message17=
Message18=
Message19=
Message20=
Message21=
Message22=
Message23=
Message24=
Message25=
Message26=
Message27=The Default profile cannot be deleted!
Message28=File error.Could not delete the profile's macro library!
Message29=Do you really want to delete the profile :
Message30=File error.Could not copy default macros to profile!
Message31=was loaded!
Message32=The axis calibration makes a measurement to calibrate the steps per units resolution value for the machine axis. To abort and close this window press the cancel button.
Message33=Mark the current position of the machine axis. Set the distance and the feedrate on this page and press the OK button to make a movement.
Message34=Measure the travel distance on the machine axis from the previously marked point to the current point. Type the measured value to the field below and press OK.
Message35=The new steps per value was calculated and written to the below field. To save the new value press OK. The process is then finished.
Message36=Switch spindle on first
Message37=Move Z-axis first to safeZ height:
Message38=Make movement with safeZ to:
Message39=Start position(Units):
Message40=Actual steps per Unit:
Message41=Distance to move(Units):
Message42=Feed rate(Units/min):
Message43=Distance measured(Units):
Message44=Steps per Units calculated value:
Message45=The software limits is lower than the safeZ height. Execute the command anyways?
Message46=was created!
[Hotkeysettings]
Keycode1=39
Buttoncode1=147
Keycode2=37
Buttoncode2=148
Keycode3=38
Buttoncode3=149
Keycode4=40
Buttoncode4=150
Keycode5=33
Buttoncode5=151
Keycode6=34
Buttoncode6=152
Keycode7=45
Buttoncode7=153
Keycode8=46
Buttoncode8=154
Keycode9=81
Buttoncode9=155
Keycode10=65
Buttoncode10=156
Keycode11=87
Buttoncode11=157
Keycode12=83
Buttoncode12=158
Keycode13=27
Buttoncode13=130
Keycode14=0
Buttoncode14=0
Keycode15=0
Buttoncode15=0
Keycode16=0
Buttoncode16=0
Keycode17=0
Buttoncode17=0
Keycode18=0
Buttoncode18=0
Keycode19=0
Buttoncode19=0
Keycode20=0
Buttoncode20=0
Keycode21=0
Buttoncode21=0
Keycode22=0
Buttoncode22=0
Keycode23=0
Buttoncode23=0
Keycode24=0
Buttoncode24=0
Keycode25=0
Buttoncode25=0
Keycode26=0
Buttoncode26=0
Keycode27=0
Buttoncode27=0
Keycode28=0
Buttoncode28=0
Keycode29=0
Buttoncode29=0
Keycode30=0
Buttoncode30=0
Keycode31=0
Buttoncode31=0
Keycode32=0
Buttoncode32=0
Keycode33=0
Buttoncode33=0
Keycode34=0
Buttoncode34=0
Keycode35=0
Buttoncode35=0
Keycode36=0
Buttoncode36=0
Keycode37=0
Buttoncode37=0
Keycode38=0
Buttoncode38=0
Keycode39=0
Buttoncode39=0
Keycode40=0
Buttoncode40=0
Keycode41=0
Buttoncode41=0
Keycode42=0
Buttoncode42=0
Keycode43=0
Buttoncode43=0
Keycode44=0
Buttoncode44=0
Keycode45=0
Buttoncode45=0
Keycode46=0
Buttoncode46=0
Keycode47=0
Buttoncode47=0
Keycode48=0
Buttoncode48=0
Keycode49=0
Buttoncode49=0
Keycode50=0
Buttoncode50=0
Keycode51=0
Buttoncode51=0
Keycode52=0
Buttoncode52=0
Keycode53=0
Buttoncode53=0
Keycode54=0
Buttoncode54=0
Keycode55=0
Buttoncode55=0
Keycode56=0
Buttoncode56=0
Keycode57=0
Buttoncode57=0
Keycode58=0
Buttoncode58=0
Keycode59=0
Buttoncode59=0
Keycode60=0
Buttoncode60=0
Keycode61=0
Buttoncode61=0
Keycode62=0
Buttoncode62=0
Keycode63=0
Buttoncode63=0
Keycode64=0
Buttoncode64=0
Keycode65=0
Buttoncode65=0
Keycode66=0
Buttoncode66=0
Keycode67=0
Buttoncode67=0
Keycode68=0
Buttoncode68=0
Keycode69=0
Buttoncode69=0
Keycode70=0
Buttoncode70=0
Keycode71=0
Buttoncode71=0
Keycode72=0
Buttoncode72=0
Keycode73=0
Buttoncode73=0
Keycode74=0
Buttoncode74=0
Keycode75=0
Buttoncode75=0
Keycode76=0
Buttoncode76=0
Keycode77=0
Buttoncode77=0
Keycode78=0
Buttoncode78=0
Keycode79=0
Buttoncode79=0
Keycode80=0
Buttoncode80=0
Keycode81=0
Buttoncode81=0
Keycode82=0
Buttoncode82=0
Keycode83=0
Buttoncode83=0
Keycode84=0
Buttoncode84=0
Keycode85=0
Buttoncode85=0
Keycode86=0
Buttoncode86=0
Keycode87=0
Buttoncode87=0
Keycode88=0
Buttoncode88=0
Keycode89=0
Buttoncode89=0
Keycode90=0
Buttoncode90=0
Keycode91=0
Buttoncode91=0
Keycode92=0
Buttoncode92=0
Keycode93=0
Buttoncode93=0
Keycode94=0
Buttoncode94=0
Keycode95=0
Buttoncode95=0
Keycode96=0
Buttoncode96=0
[Inputtriggersettings]
Pin1=0
Port1=0
Buttoncode1=0
Activelow1=False
Pin2=0
Port2=0
Buttoncode2=0
Activelow2=False
Pin3=0
Port3=0
Buttoncode3=0
Activelow3=False
Pin4=0
Port4=0
Buttoncode4=0
Activelow4=False
Pin5=0
Port5=0
Buttoncode5=0
Activelow5=False
Pin6=0
Port6=0
Buttoncode6=0
Activelow6=False
Pin7=0
Port7=0
Buttoncode7=0
Activelow7=False
Pin8=0
Port8=0
Buttoncode8=0
Activelow8=False
Pin9=0
Port9=0
Buttoncode9=0
Activelow9=False
Pin10=0
Port10=0
Buttoncode10=0
Activelow10=False
Pin11=0
Port11=0
Buttoncode11=0
Activelow11=False
Pin12=0
Port12=0
Buttoncode12=0
Activelow12=False
Pin13=0
Port13=0
Buttoncode13=0
Activelow13=False
Pin14=0
Port14=0
Buttoncode14=0
Activelow14=False
Pin15=0
Port15=0
Buttoncode15=0
Activelow15=False
Pin16=0
Port16=0
Buttoncode16=0
Activelow16=False
Pin17=0
Port17=0
Buttoncode17=0
Activelow17=False
Pin18=0
Port18=0
Buttoncode18=0
Activelow18=False
Pin19=0
Port19=0
Buttoncode19=0
Activelow19=False
Pin20=0
Port20=0
Buttoncode20=0
Activelow20=False
Pin21=0
Port21=0
Buttoncode21=0
Activelow21=False
Pin22=0
Port22=0
Buttoncode22=0
Activelow22=False
Pin23=0
Port23=0
Buttoncode23=0
Activelow23=False
Pin24=0
Port24=0
Buttoncode24=0
Activelow24=False
Pin25=0
Port25=0
Buttoncode25=0
Activelow25=False
Pin26=0
Port26=0
Buttoncode26=0
Activelow26=False
Pin27=0
Port27=0
Buttoncode27=0
Activelow27=False
Pin28=0
Port28=0
Buttoncode28=0
Activelow28=False
Pin29=0
Port29=0
Buttoncode29=0
Activelow29=False
Pin30=0
Port30=0
Buttoncode30=0
Activelow30=False
Pin31=0
Port31=0
Buttoncode31=0
Activelow31=False
Pin32=0
Port32=0
Buttoncode32=0
Activelow32=False
Pin33=0
Port33=0
Buttoncode33=0
Activelow33=False
Pin34=0
Port34=0
Buttoncode34=0
Activelow34=False
Pin35=0
Port35=0
Buttoncode35=0
Activelow35=False
Pin36=0
Port36=0
Buttoncode36=0
Activelow36=False
Pin37=0
Port37=0
Buttoncode37=0
Activelow37=False
Pin38=0
Port38=0
Buttoncode38=0
Activelow38=False
Pin39=0
Port39=0
Buttoncode39=0
Activelow39=False
Pin40=0
Port40=0
Buttoncode40=0
Activelow40=False
Pin41=0
Port41=0
Buttoncode41=0
Activelow41=False
Pin42=0
Port42=0
Buttoncode42=0
Activelow42=False
Pin43=0
Port43=0
Buttoncode43=0
Activelow43=False
Pin44=0
Port44=0
Buttoncode44=0
Activelow44=False
Pin45=0
Port45=0
Buttoncode45=0
Activelow45=False
Pin46=0
Port46=0
Buttoncode46=0
Activelow46=False
Pin47=0
Port47=0
Buttoncode47=0
Activelow47=False
Pin48=0
Port48=0
Buttoncode48=0
Activelow48=False
Pin49=0
Port49=0
Buttoncode49=0
Activelow49=False
Pin50=0
Port50=0
Buttoncode50=0
Activelow50=False
Pin51=0
Port51=0
Buttoncode51=0
Activelow51=False
Pin52=0
Port52=0
Buttoncode52=0
Activelow52=False
Pin53=0
Port53=0
Buttoncode53=0
Activelow53=False
Pin54=0
Port54=0
Buttoncode54=0
Activelow54=False
Pin55=0
Port55=0
Buttoncode55=0
Activelow55=False
Pin56=0
Port56=0
Buttoncode56=0
Activelow56=False
Pin57=0
Port57=0
Buttoncode57=0
Activelow57=False
Pin58=0
Port58=0
Buttoncode58=0
Activelow58=False
Pin59=0
Port59=0
Buttoncode59=0
Activelow59=False
Pin60=0
Port60=0
Buttoncode60=0
Activelow60=False
Pin61=0
Port61=0
Buttoncode61=0
Activelow61=False
Pin62=0
Port62=0
Buttoncode62=0
Activelow62=False
Pin63=0
Port63=0
Buttoncode63=0
Activelow63=False
Pin64=0
Port64=0
Buttoncode64=0
Activelow64=False
Pin65=0
Port65=0
Buttoncode65=0
Activelow65=False
Pin66=0
Port66=0
Buttoncode66=0
Activelow66=False
Pin67=0
Port67=0
Buttoncode67=0
Activelow67=False
Pin68=0
Port68=0
Buttoncode68=0
Activelow68=False
Pin69=0
Port69=0
Buttoncode69=0
Activelow69=False
Pin70=0
Port70=0
Buttoncode70=0
Activelow70=False
Pin71=0
Port71=0
Buttoncode71=0
Activelow71=False
Pin72=0
Port72=0
Buttoncode72=0
Activelow72=False
Pin73=0
Port73=0
Buttoncode73=0
Activelow73=False
Pin74=0
Port74=0
Buttoncode74=0
Activelow74=False
Pin75=0
Port75=0
Buttoncode75=0
Activelow75=False
Pin76=0
Port76=0
Buttoncode76=0
Activelow76=False
Pin77=0
Port77=0
Buttoncode77=0
Activelow77=False
Pin78=0
Port78=0
Buttoncode78=0
Activelow78=False
Pin79=0
Port79=0
Buttoncode79=0
Activelow79=False
Pin80=0
Port80=0
Buttoncode80=0
Activelow80=False
Pin81=0
Port81=0
Buttoncode81=0
Activelow81=False
Pin82=0
Port82=0
Buttoncode82=0
Activelow82=False
Pin83=0
Port83=0
Buttoncode83=0
Activelow83=False
Pin84=0
Port84=0
Buttoncode84=0
Activelow84=False
Pin85=0
Port85=0
Buttoncode85=0
Activelow85=False
Pin86=0
Port86=0
Buttoncode86=0
Activelow86=False
Pin87=0
Port87=0
Buttoncode87=0
Activelow87=False
Pin88=0
Port88=0
Buttoncode88=0
Activelow88=False
Pin89=0
Port89=0
Buttoncode89=0
Activelow89=False
Pin90=0
Port90=0
Buttoncode90=0
Activelow90=False
Pin91=0
Port91=0
Buttoncode91=0
Activelow91=False
Pin92=0
Port92=0
Buttoncode92=0
Activelow92=False
Pin93=0
Port93=0
Buttoncode93=0
Activelow93=False
Pin94=0
Port94=0
Buttoncode94=0
Activelow94=False
Pin95=0
Port95=0
Buttoncode95=0
Activelow95=False
Pin96=0
Port96=0
Buttoncode96=0
Activelow96=False
[Outputtriggersettings]
Pin1=0
Port1=0
LEDcode1=29
Invert1=False
Pin2=0
Port2=0
LEDcode2=30
Invert2=False
Pin3=0
Port3=0
LEDcode3=31
Invert3=False
Pin4=0
Port4=0
LEDcode4=0
Invert4=False
Pin5=0
Port5=0
LEDcode5=0
Invert5=False
Pin6=0
Port6=0
LEDcode6=0
Invert6=False
Pin7=0
Port7=0
LEDcode7=0
Invert7=False
Pin8=0
Port8=0
LEDcode8=0
Invert8=False
Pin9=0
Port9=0
LEDcode9=0
Invert9=False
Pin10=0
Port10=0
LEDcode10=0
Invert10=False
Pin11=0
Port11=0
LEDcode11=0
Invert11=False
Pin12=0
Port12=0
LEDcode12=0
Invert12=False
Pin13=0
Port13=0
LEDcode13=0
Invert13=False
Pin14=0
Port14=0
LEDcode14=0
Invert14=False
Pin15=0
Port15=0
LEDcode15=0
Invert15=False
Pin16=0
Port16=0
LEDcode16=0
Invert16=False
Pin17=0
Port17=0
LEDcode17=0
Invert17=False
Pin18=0
Port18=0
LEDcode18=0
Invert18=False
Pin19=0
Port19=0
LEDcode19=0
Invert19=False
Pin20=0
Port20=0
LEDcode20=0
Invert20=False
Pin21=0
Port21=0
LEDcode21=0
Invert21=False
Pin22=0
Port22=0
LEDcode22=0
Invert22=False
Pin23=0
Port23=0
LEDcode23=0
Invert23=False
Pin24=0
Port24=0
LEDcode24=0
Invert24=False
Pin25=0
Port25=0
LEDcode25=0
Invert25=False
Pin26=0
Port26=0
LEDcode26=0
Invert26=False
Pin27=0
Port27=0
LEDcode27=0
Invert27=False
Pin28=0
Port28=0
LEDcode28=0
Invert28=False
Pin29=0
Port29=0
LEDcode29=0
Invert29=False
Pin30=0
Port30=0
LEDcode30=0
Invert30=False
Pin31=0
Port31=0
LEDcode31=0
Invert31=False
Pin32=0
Port32=0
LEDcode32=0
Invert32=False
Pin33=0
Port33=0
LEDcode33=0
Invert33=False
Pin34=0
Port34=0
LEDcode34=0
Invert34=False
Pin35=0
Port35=0
LEDcode35=0
Invert35=False
Pin36=0
Port36=0
LEDcode36=0
Invert36=False
Pin37=0
Port37=0
LEDcode37=0
Invert37=False
Pin38=0
Port38=0
LEDcode38=0
Invert38=False
Pin39=0
Port39=0
LEDcode39=0
Invert39=False
Pin40=0
Port40=0
LEDcode40=0
Invert40=False
Pin41=0
Port41=0
LEDcode41=0
Invert41=False
Pin42=0
Port42=0
LEDcode42=0
Invert42=False
Pin43=0
Port43=0
LEDcode43=0
Invert43=False
Pin44=0
Port44=0
LEDcode44=0
Invert44=False
Pin45=0
Port45=0
LEDcode45=0
Invert45=False
Pin46=0
Port46=0
LEDcode46=0
Invert46=False
Pin47=0
Port47=0
LEDcode47=0
Invert47=False
Pin48=0
Port48=0
LEDcode48=0
Invert48=False
Pin49=0
Port49=0
LEDcode49=0
Invert49=False
Pin50=0
Port50=0
LEDcode50=0
Invert50=False
Pin51=0
Port51=0
LEDcode51=0
Invert51=False
Pin52=0
Port52=0
LEDcode52=0
Invert52=False
Pin53=0
Port53=0
LEDcode53=0
Invert53=False
Pin54=0
Port54=0
LEDcode54=0
Invert54=False
Pin55=0
Port55=0
LEDcode55=0
Invert55=False
Pin56=0
Port56=0
LEDcode56=0
Invert56=False
Pin57=0
Port57=0
LEDcode57=0
Invert57=False
Pin58=0
Port58=0
LEDcode58=0
Invert58=False
Pin59=0
Port59=0
LEDcode59=0
Invert59=False
Pin60=0
Port60=0
LEDcode60=0
Invert60=False
Pin61=0
Port61=0
LEDcode61=0
Invert61=False
Pin62=0
Port62=0
LEDcode62=0
Invert62=False
Pin63=0
Port63=0
LEDcode63=0
Invert63=False
Pin64=0
Port64=0
LEDcode64=0
Invert64=False
Pin65=0
Port65=0
LEDcode65=0
Invert65=False
Pin66=0
Port66=0
LEDcode66=0
Invert66=False
Pin67=0
Port67=0
LEDcode67=0
Invert67=False
Pin68=0
Port68=0
LEDcode68=0
Invert68=False
Pin69=0
Port69=0
LEDcode69=0
Invert69=False
Pin70=0
Port70=0
LEDcode70=0
Invert70=False
Pin71=0
Port71=0
LEDcode71=0
Invert71=False
Pin72=0
Port72=0
LEDcode72=0
Invert72=False
Pin73=0
Port73=0
LEDcode73=0
Invert73=False
Pin74=0
Port74=0
LEDcode74=0
Invert74=False
Pin75=0
Port75=0
LEDcode75=0
Invert75=False
Pin76=0
Port76=0
LEDcode76=0
Invert76=False
Pin77=0
Port77=0
LEDcode77=0
Invert77=False
Pin78=0
Port78=0
LEDcode78=0
Invert78=False
Pin79=0
Port79=0
LEDcode79=0
Invert79=False
Pin80=0
Port80=0
LEDcode80=0
Invert80=False
Pin81=0
Port81=0
LEDcode81=0
Invert81=False
Pin82=0
Port82=0
LEDcode82=0
Invert82=False
Pin83=0
Port83=0
LEDcode83=0
Invert83=False
Pin84=0
Port84=0
LEDcode84=0
Invert84=False
Pin85=0
Port85=0
LEDcode85=0
Invert85=False
Pin86=0
Port86=0
LEDcode86=0
Invert86=False
Pin87=0
Port87=0
LEDcode87=0
Invert87=False
Pin88=0
Port88=0
LEDcode88=0
Invert88=False
Pin89=0
Port89=0
LEDcode89=0
Invert89=False
Pin90=0
Port90=0
LEDcode90=0
Invert90=False
Pin91=0
Port91=0
LEDcode91=0
Invert91=False
Pin92=0
Port92=0
LEDcode92=0
Invert92=False
Pin93=0
Port93=0
LEDcode93=0
Invert93=False
Pin94=0
Port94=0
LEDcode94=0
Invert94=False
Pin95=0
Port95=0
LEDcode95=0
Invert95=False
Pin96=0
Port96=0
LEDcode96=0
Invert96=False
[CAMsettings]
Tooldia=0
Startdepth=0
Cutdepth=0
Cutperpass=0
SafeZ=0
Feedrate=0
Tooloverlap=0
Plungerate=0
Spindlespeed=0
Arctolerance=0.01
[Laserengraveplugin]
workpiecewidth=50
workpieceheight=50
keepaspectratio=True
Yscandistance=0.2
Feedrate=1000
Originsetting=7
[Plugins_enabled]
Debugger.dll=False
Diagnostics.dll=False
Laserengrave.dll=False
Plugintest.dll=False
Webcamera.dll=False
Printer3D.dll=False
UCR200Plugin.dll=False
Xbox360controller.dll=False
Scope.dll=False
AutoLevelerCA.dll=False
Modbusmaster.dll=False
UCCNC_OSK.dll=False
UCR201Plugin.dll=False
XHC-HB04_pendant.dll=False
HYPLUGIN.dll=True
[Plugins_callstartup]
Debugger.dll=False
Diagnostics.dll=False
Laserengrave.dll=False
Plugintest.dll=False
Webcamera.dll=False
Printer3D.dll=False
UCR200Plugin.dll=False
Xbox360controller.dll=False
Scope.dll=False
AutoLevelerCA.dll=False
Modbusmaster.dll=False
UCCNC_OSK.dll=False
UCR201Plugin.dll=False
XHC-HB04_pendant.dll=False
HYPLUGIN.dll=True
[Macroloops]
Macroloopautorun0=False
Macroloopnumber0=0
Macroloopautorun1=False
Macroloopnumber1=0
Macroloopautorun2=False
Macroloopnumber2=0
Macroloopautorun3=False
Macroloopnumber3=0
Macroloopautorun4=False
Macroloopnumber4=0
Macroloopautorun5=False
Macroloopnumber5=0
Macroloopautorun6=False
Macroloopnumber6=0
Macroloopautorun7=False
Macroloopnumber7=0
Macroloopautorun8=False
Macroloopnumber8=0
Macroloopautorun9=False
Macroloopnumber9=0
Macroloopautorun10=False
Macroloopnumber10=0
Macroloopautorun11=False
Macroloopnumber11=0
Macroloopautorun12=False
Macroloopnumber12=0
Macroloopautorun13=False
Macroloopnumber13=0
Macroloopautorun14=False
Macroloopnumber14=0
Macroloopautorun15=False
Macroloopnumber15=0
Macroloopautorun16=False
Macroloopnumber16=0
Macroloopautorun17=False
Macroloopnumber17=0
Macroloopautorun18=False
Macroloopnumber18=0
Macroloopautorun19=False
Macroloopnumber19=0
Macroloopautorun20=False
Macroloopnumber20=0
Macroloopautorun21=False
Macroloopnumber21=0
Macroloopautorun22=False
Macroloopnumber22=0
Macroloopautorun23=False
Macroloopnumber23=0
Macroloopautorun24=False
Macroloopnumber24=0
Macroloopautorun25=False
Macroloopnumber25=0
Macroloopautorun26=False
Macroloopnumber26=0
Macroloopautorun27=False
Macroloopnumber27=0
Macroloopautorun28=False
Macroloopnumber28=0
Macroloopautorun29=False
Macroloopnumber29=0
Macroloopautorun30=False
Macroloopnumber30=0
Macroloopautorun31=False
Macroloopnumber31=0
Macroloopautorun32=False
Macroloopnumber32=0
Macroloopautorun33=False
Macroloopnumber33=0
Macroloopautorun34=False
Macroloopnumber34=0
Macroloopautorun35=False
Macroloopnumber35=0
Macroloopautorun36=False
Macroloopnumber36=0
Macroloopautorun37=False
Macroloopnumber37=0
Macroloopautorun38=False
Macroloopnumber38=0
Macroloopautorun39=False
Macroloopnumber39=0
Macroloopautorun40=False
Macroloopnumber40=0
Macroloopautorun41=False
Macroloopnumber41=0
Macroloopautorun42=False
Macroloopnumber42=0
Macroloopautorun43=False
Macroloopnumber43=0
Macroloopautorun44=False
Macroloopnumber44=0
Macroloopautorun45=False
Macroloopnumber45=0
Macroloopautorun46=False
Macroloopnumber46=0
Macroloopautorun47=False
Macroloopnumber47=0
[SpindlePIDsettings]
PIDenable=False
Kp=1
Kd=0
Ki=0.01
Samplingtime=10
[AUXencodersettings]
AUXencoder1pinA=0
AUXencoder1portA=0
AUXencoder1pinB=0
AUXencoder1portB=0
AUXencoder2pinA=0
AUXencoder2portA=0
AUXencoder2pinB=0
AUXencoder2portB=0
AUXencoder3pinA=0
AUXencoder3portA=0
AUXencoder3pinB=0
AUXencoder3portB=0
AUXencoder4pinA=0
AUXencoder4portA=0
AUXencoder4pinB=0
AUXencoder4portB=0
AUXencoder5pinA=0
AUXencoder5portA=0
AUXencoder5pinB=0
AUXencoder5portB=0
Aux1Encodercountsper=0
Aux2Encodercountsper=0
Aux3Encodercountsper=0
Aux4Encodercountsper=0
Aux5Encodercountsper=0
Aux6Encodercountsper=0
[Digitizesettings]
Addaxisnames=False
Xinclude=True
Yinclude=True
Zinclude=True
Ainclude=False
Binclude=False
Cinclude=False
Commaseparation=False
Filenametosave=C:\UCCNC\Example_codes\Digitize.txt
Numberofdigits=4
Probedia=0
Clearfilenamewhenfinished=False
[Statistics]
TotalM3s=235
TotalM4s=0
TotalM7s=1
TotalM8s=2
Totaltimedays=0
Totaltimehours=13
Totaltimeminutes=57
Totaltimeseconds=55
M3timedays=0
M3timehours=2
M3timeminutes=2
M3timeseconds=54
M4timedays=0
M4timehours=0
M4timeminutes=0
M4timeseconds=0
Cyclestimedays=0
Cyclestimehours=0
Cyclestimeminutes=11
Cyclestimeseconds=36
TotaldistX=451
TotalcutX=145
TotaldistY=605
TotalcutY=85
TotaldistZ=135
TotalcutZ=36
TotaldistA=0
TotalcutA=0
TotaldistB=0
TotalcutB=0
TotaldistC=0
TotalcutC=0
UCdevicetype=UC100
[UserCheckboxes]
20301=False
20302=False
20303=False
20304=False
20305=False
20306=False
20307=False
20308=False
20312=False
20309=False
20310=False
20311=False
[UserTextfields]
20333=0.1
20334=0.0
20335=0.01
20336=0.01
20337=0.01
20338=0.01
20339=0.0
20340=0.01
20341=0.0
20342=0.01
20343=0.0
20344=0.0
20345=0.0
20346=0.0
20347=0.0
20348=0.0
20349=0.0ø
20350=0.0
20304=0.0
20300=0.0
20301=0.0
20302=0.0
20303=0.0
20305=0.0
20306=0.0
20307=0.0
20308=0.0
20309=1
20310=5
20311=10
20312=25
20313=50
20314=100
20315=0.001
20316=0.01
20317=0.1
20318=0.25
20319=0.5
20320=1.0
20321=0.0
20322=0.0
20323=0.0
20324=0.0
20325=0.0
20326=0.0
20327=0.0
20328=0.0
20329=0.0
20330=0.0
20331=0.0
20332=0.0
20351=0.0
20352=0.0
20353=0.0
20354=0.0
20355=0.0
20356=0.0
20357=0
20358=0.0
[2017JogSpeeds]
913=5
2027=0.01
[Hyplugin]
Selectedport=COM5
Selectedbaud=9600
SelectedFreq=400
Selectedminrpm=6000
Selectedmaxrpm=24000
SactField=
AmpFeild=
OnOff=False
AmpCB=False
Did you set all the required parameters in the VFD?
PD001
PD002
PD004
PD163
PD164
PD165
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
pd001 is 2
pd002 is 2
pd004 is 400.0
pd163 is 001
pd164 is 1
pd165 is 3
Dan would no better, but it sounds like the RS-485 adapter is either not working, or not wired correctly.
RS-485 adapter issues seem to be very common.
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
I've tried 2. from 2 different sellers. I guess I could try ordering more.
I think I've tried about everything
Dan might know better.
Can you control the spindle with spindletalker?
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
no. It just continues to send commands, but nothing is received
It may seem like it's communicating because written bytes are only showing what serial port is putting out, no test for rs485 and VFD. If no response than communication is your problem, even if a bad/incorrect byte array was sent the VFD will still reply.
If your able to download a free Serial Monitor and post dump it will give a more definitive clue of what's happening.
Dan
Do you have a preference and maybe a link?
This is the one I use, it gives a 14 day free trail period. Use dump view to post.
https://www.eltima.com/products/serial-port-monitor/
Ok, I received the new adapters, plugged everything in and started spindle talker and everything works as advertised. I opened uccnc typed s24000, enter. 24000 appeared in the box. Hit start, the spindle started to turn, stopped and I got this message:
the application lost the connection with the motion controller device. Check the connection. The application is closing now.
if I restart the application, it goes into demo mode. I have to unplug the uc100, plug it back in to get uccnc to restart.
Any ideas?
thanks
The VFD and/or spindle wiring is interfering with the UC100 USB connection.
Is the spindle using shielded wire, and properly grounded?
You might want to try a shielded USB cable with ferrite beads on it.
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
I’m using a shielded twisted pair I got from our avionics shop. Grounded on both ends. Shielded power wire. I’m also using a shielded usb cable, but no ferrite beads. I’m sure I have one though. I’ll give that a try.
thanks
You have broken the most important rule of using shielded cable. Thou shalt ground the shield at one end only. Usually the shield is connected at the VFD end. Grounding the shield at both ends cause earth loops and a world of trouble.
Cheers
Peter
Sent from my LG-H990 using Tapatalk
The ingenuity of idiots is unlimited.
http://www.youtube.com/user/cncnutz