Newbie Can't move geomitry around to select it.


Results 1 to 3 of 3

Thread: Can't move geomitry around to select it.

  1. #1
    Registered
    Join Date
    Mar 2014
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default Can't move geomitry around to select it.

    Hello, I am new and have drawn my part. Just when I am selecting the geometry, I need move the part to select more geometry. I can soom in and out but not move it left or right. Sorry I am not so good at this and would and would appreciate and help.


    Thank you all so very much

    Similar Threads:


  2. #2
    Registered
    Join Date
    Mar 2014
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default Re: Can't move geomitry around to select it.

    I want anyone who had this same problem if yoy look at the tool bar there is a cross with arrows on it that is the move all the display and part around to be able to select other geometry.

    Thank you.



  3. #3
    Member The Engine Guy's Avatar
    Join Date
    Jun 2008
    Location
    UK
    Posts
    1838
    Downloads
    0
    Uploads
    0

    Default Re: Can't move geomitry around to select it.

    If you hold the "Ctrl" key down on your keyboard the middle scroll wheel on the mouse will also put you in the "Pan" mode (Cross Icon)



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Can't move geomitry around to select it.

Can't move geomitry around to select it.