Hey Guys, Ive got a 1984 Leblond makino fnc74 with the fanuc 6mb controller. Im using the bobcad cam v27. What post processor setup should i be using? I have tried using the Fanuc_6MB_Rev1. MillPst, Fanuc_6MB__Mazak_V5__Rev1.MillPst, and Fanuc_6MB__Mori_MV-55__Rev1.MillPst. None of these have properly milled a part for me. They all have some issue. any help would be greatly appreciated. also if you have the actual machine definitions that would be appreciated also.
thanks matt