10"/250MM Lathe Scroll Chuck

[tomross]

Greetings,

I have a lathe chuck here at the shop that I did not purchase. It is mounted on a plate for mill use. The chuck has no markings of who made it, other than being manufactured in China. It also has solid 1 way jaws.

The jaw dims are 27mm x 70mm x 106mm. Slot dims 5.1 deep x 10 wide.

I would like to find hard jaws that will work on this chuck that I can attach aluminum pie jaws to. But I'm not finding anything that is close to matching the solid jaw dimensions.

Any help pointing me to where I can find something would be greatly appreciated.


Tom

Similar Threads:

• Any 7x lathe with 5" 4 jaw chuck owners?
• Looking for a 4 jaw scroll chuck for G0602 lathe.
• 4 or 5" 4-jaw chuck for 7x12 mini lathe.
• Q: 5" 4-jaw chuck on mini lathe.

[fgjtyue]

I also have this problem super mario bros