Need Advice - How to program on mill/turn center

Results 1 to 3 of 3

Thread: Need Advice - How to program on mill/turn center

  1. #1

    Default Need Advice - How to program on mill/turn center

    Good morning all.
    How would you program the following worm gear on a mill/turn center? We have a Mori Sieki NL3000 and we use Fusion 360 for our CAM software, but as far as I can tell Fusion doesn't have the capability to program this, since it would need multiple starts with a 4mm insert. Any ideas from anyone?

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Need Advice - How to program on mill/turn center-20200804_203104-jpg   Need Advice - How to program on mill/turn center-20200804_203120-jpg  


  2. #2
    Member
    Join Date
    Oct 2009
    Location
    world
    Posts
    114
    Downloads
    0
    Uploads
    0

    Default Re: Need Advice - How to program on mill/turn center

    Is it C axis machine. Better to use a C axis machine.And call a tool maker.



  3. #3

    Default Re: Need Advice - How to program on mill/turn center

    Quote Originally Posted by MCR-B II View Post
    Is it C axis machine. Better to use a C axis machine.And call a tool maker.
    Yes it is a C-axis. You mean get a custom tool made?



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Need Advice - How to program on mill/turn center

Need Advice - How to program on mill/turn center