- 8-32 external threads g76 program help
-
Member
8-32 external threads g76 program help
Hello. I am turning 5/16 OD 12L14 down to .166 dia. Then cutting 8-32 external threads. What speeds , feeds and how much material would I take per pass to avoid flexing the material? Have never cut threads this small.
Similar Threads:
-
-
Member
Re: 8-32 external threads g76 program help
I think that the answer depends on how you are planning to cut the threads
single point --split up the turn and threads to to three passes
-
Member
Re: 8-32 external threads g76 program help
Thanks for reply. I turned material from 5/16 dia to .166 in one pass. I cut the threads single point in 3 passes. Worked great.
-
Re: 8-32 external threads g76 program help
Just cut the threads single point in 3 passes.
basketball legends
- 8-32 external threads g76 program help
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules