Broaching ID bore

[machiningeny]

Hello
I have a problem I am trying to do multiple key slots or broaching I am using Haas CNC lathe using the following codes
T101
G97 S0 M5 because I need the spindle not turning
G54G0 x1.900 Z.1 clarence inside bore
G92X1.93Z-1.5F1.500
X1.950
X1.970
X1.990
X1.995
X2.000
G0 Z1.0
G53 X0 Z0 M5
M30

But for some reason the machine alarmed (spindle not rotating)
It is any special code that I am missing? Or anything that I need to do in parameters to make the machine do the internal key?
I have done it on other machines
Please help
And thanks for any help

[Jim Dawson]

Maybe try S0 M4? Might want to make an air cut when you try this.

[rcs60]

looks like you are in g99 mode IPR and would need to have g98 IPM programmed