Help Identifying Collets

Results 1 to 2 of 2

Thread: Help Identifying Collets

  1. #1
    Member RPratt94's Avatar
    Join Date
    Aug 2021
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Help Identifying Collets

    My shop just picked up a 1958 Monarch 10EE and it came with a collet closer and half of a set of collets I was looking to complete. The only issue is that the collets are unusual and only marked with the size, while the collet closer is only marked with "Germany". Does anyone have any guesses on the collet type for me to look for others? I searched for a while and can't find anything exactly identical. The straight knurling is unusual as is the externally threaded end without a milled slot like 5Cs have.
    Any help would be appreciated.
    Thank you

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Help Identifying Collets-20211015_071217-jpg   Help Identifying Collets-20211015_071241-jpg   Help Identifying Collets-20211015_071309-jpg   Help Identifying Collets-20211015_071207-jpg  



  2. #2
    Member RPratt94's Avatar
    Join Date
    Aug 2021
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Re: Help Identifying Collets

    the external thread is M36x1.5



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Help Identifying Collets

Help Identifying Collets