APC Alarm - Doosan Puma TL2000

Results 1 to 6 of 6

Thread: APC Alarm - Doosan Puma TL2000

  1. #1
    Registered bullet01's Avatar
    Join Date
    May 2009
    Location
    Buchstehude
    Posts
    1352
    Downloads
    0
    Uploads
    0

    Default

    Hello


    The alarm "APC" flashes on my Doosan Puma TL2000 with Fanuc 18i-TB.
    Since that I also can’t transmit any programs anymore,
    because the error message "memory overflow" comes up.
    But the memory itself is not full.

    Who knows about this problem.

    I've already informed our Doosan dealer but they will call me back, as usual....



  2. #2
    Drehteileanfertigung's Avatar
    Join Date
    Apr 2010
    Location
    Overath
    Posts
    252
    Downloads
    0
    Uploads
    0

    Default

    Hello Klaus
    no alarm number?
    Greetings Guido



  3. #3
    Registered bullet01's Avatar
    Join Date
    May 2009
    Location
    Buchstehude
    Posts
    1352
    Downloads
    0
    Uploads
    0

    Default

    No, unfortunately not.
    There is only a flashing light in the alarm window APC, nothing else...



  4. #4
    Drehteileanfertigung's Avatar
    Join Date
    Apr 2010
    Location
    Overath
    Posts
    252
    Downloads
    0
    Uploads
    0

    Default

    In general one says: APC = Communication error, Battery ...
    below here there are some ways to hide more detailed errors!

    Greetings Guido
    PS. the machine is not too old? Therefore I conclude in advance that it’s not a cable problem!



  5. #5
    Registered bullet01's Avatar
    Join Date
    May 2009
    Location
    Buchstehude
    Posts
    1352
    Downloads
    0
    Uploads
    0

    Default

    Yes you are right,
    I just received the info from the dealer,
    it is a battery alarm,
    But the memory overflow must be another problem...



  6. #6
    Drehteileanfertigung's Avatar
    Join Date
    Apr 2010
    Location
    Overath
    Posts
    252
    Downloads
    0
    Uploads
    0

    Default

    Yes you are right,
    I just received the info from the dealer,
    it is a battery alarm,
    But the memory overflow must be another problem...
    HI

    Swap the batteries first and have a look if the memory overflow problem still persists - I doubt it.
    Are you working on or with a CF card?
    -> often consecutive fault follow which then magically appear afterwards..
    Little tip! also clean the fans of the drives ;-)

    Greetings Guido



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

APC Alarm - Doosan Puma TL2000

APC Alarm - Doosan Puma TL2000

APC Alarm - Doosan Puma TL2000