Hello Klaus
no alarm number?
Greetings Guido
Hello
The alarm "APC" flashes on my Doosan Puma TL2000 with Fanuc 18i-TB.
Since that I also can’t transmit any programs anymore,
because the error message "memory overflow" comes up.
But the memory itself is not full.
Who knows about this problem.
I've already informed our Doosan dealer but they will call me back, as usual....
Hello Klaus
no alarm number?
Greetings Guido
No, unfortunately not.
There is only a flashing light in the alarm window APC, nothing else...
In general one says: APC = Communication error, Battery ...
below here there are some ways to hide more detailed errors!
Greetings Guido
PS. the machine is not too old? Therefore I conclude in advance that it’s not a cable problem!
Yes you are right,
I just received the info from the dealer,
it is a battery alarm,
But the memory overflow must be another problem...
HIYes you are right,
I just received the info from the dealer,
it is a battery alarm,
But the memory overflow must be another problem...
Swap the batteries first and have a look if the memory overflow problem still persists - I doubt it.
Are you working on or with a CF card?
-> often consecutive fault follow which then magically appear afterwards..
Little tip! also clean the fans of the drives ;-)
Greetings Guido