TurboCNC does not have PWM output, so I don't think you can use the 0-10V from that board.
Good time of day.
I sruggle with configuration of BL-MACH-V11 (see attachments) board and brushless spindle WS55-180 (https://www.banggood.com/400W-12000r...r_warehouse=CN).
I have selected pin 17 to control EN input of controller and pin 16 to control F/R (direction of rotation).
The board has regulated 0-10V output to control rotation speed of spindle. The problem is that all information I could get is related to Mach3 software, not TurboCNC. Which pin is in charge of this function and how can I set it up?
I have googled it and went through manual - no joy.
Can somebody explain me, how can I set this function in TurboCNC?
Thanks in advance.
Similar Threads:
TurboCNC does not have PWM output, so I don't think you can use the 0-10V from that board.
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)