Surfcam Post Processor


Results 1 to 8 of 8

Thread: Surfcam Post Processor

  1. #1
    Registered
    Join Date
    Jun 2003
    Location
    Quebec, Canada
    Posts
    65
    Downloads
    0
    Uploads
    0

    Default Surfcam Post Processor

    Hi all,

    Does anyone have a post processor for Surfcam.

    Thanks,
    Will

    Similar Threads:


  2. #2
    Registered Bowman's Avatar
    Join Date
    Sep 2004
    Location
    USA
    Posts
    218
    Downloads
    0
    Uploads
    0

    Default

    You may want to try the post for AllenBradley8400 Control I recently was tipped about this one for use with TCNC. I have used the HAAS post with a little editing with TCNC. If they were included with Surfcam give them a try. Good luck.

    Bowman



  3. #3
    Registered
    Join Date
    Jun 2003
    Location
    Quebec, Canada
    Posts
    65
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by Bowman
    You may want to try the post for AllenBradley8400 Control I recently was tipped about this one for use with TCNC. I have used the HAAS post with a little editing with TCNC. If they were included with Surfcam give them a try. Good luck.

    Bowman
    I also have been using the Haas post with some tweaking, but the 4axis is totalty messed up. I will try the AllenBradley8400.

    Will



  4. #4
    Registered
    Join Date
    Jan 2006
    Location
    USA
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default

    I need some help with Surfcam. I have had to change computers due to a crash and now I need to get my post processor working again. I need to know how to activate one of the post already listed and also how to get my custom post to work. Which files to put where. Any help would be greatly appreciated



  5. #5
    Registered
    Join Date
    Jun 2003
    Location
    Quebec, Canada
    Posts
    65
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by JDEMPSEY
    I need some help with Surfcam. I have had to change computers due to a crash and now I need to get my post processor working again. I need to know how to activate one of the post already listed and also how to get my custom post to work. Which files to put where. Any help would be greatly appreciated
    Which post in surfcam do you need?



  6. #6
    Registered
    Join Date
    Jan 2006
    Location
    USA
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default surfcam post help

    I have the post. I have one for HAAS 5 axis. On the old computer I was using the out of the box HAAS VF post for 3 axis work and now it tells me path not found when I try to use it on the new computer. I have no idea on what to do to fix it. I also have no idea which files to put where so I can use my 5 axis post.



  7. #7
    Registered
    Join Date
    Jun 2003
    Location
    Quebec, Canada
    Posts
    65
    Downloads
    0
    Uploads
    0

    Default

    Sorry, been away for awhile,

    If you have a copy of your post, just copy and paste you post in the "Postform.m" located in the "Postlib" folder of the Surfcam directory.
    Afterwards restart Surfcam and you should see it in the operations manager.



  8. #8
    Member
    Join Date
    Jul 2010
    Location
    lebonon
    Posts
    14
    Downloads
    2
    Uploads
    0

    Default

    Dear JDEMPSEY

    Can you please send me the HAAS 5 axis post to test it?
    Thanks
    my e mail: sinan-ba@hotmail.com



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Surfcam Post Processor

Surfcam Post Processor