New Machine Build Turbo CAD to G code


Results 1 to 3 of 3

Thread: Turbo CAD to G code

  1. #1
    Registered
    Join Date
    Dec 2013
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Turbo CAD to G code

    I am totally ignorant on these matters and learning slowly.

    I am building a router CNC table/machine. The mechanics of it now complete and I have come to the electronics part.

    I have had Turbo CAD for a while now and have been able to use it with a certain amount of proficiency,
    I'm recommended that Mach 3 is the best software to use.

    Question :-

    How do I get a 3D drawing into g code so that Mach 3 can recognise it.

    Will Mach 3 automatically sot out how the item is machined.


    Please reply in layman's language

    Bob

    Similar Threads:


  2. #2
    Member ger21's Avatar
    Join Date
    Mar 2003
    Location
    Shelby Township
    Posts
    35538
    Downloads
    1
    Uploads
    0

    Default Re: Turbo CAD to G code

    You need a CAM program to create toolpaths from your drawings.
    Take a look at Vectric's Cut2D. Products - Cut2D

    Gerry

    UCCNC 2017 Screenset
    [URL]http://www.thecncwoodworker.com/2017.html[/URL]

    Mach3 2010 Screenset
    [URL]http://www.thecncwoodworker.com/2010.html[/URL]

    JointCAM - CNC Dovetails & Box Joints
    [URL]http://www.g-forcecnc.com/jointcam.html[/URL]

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


  3. #3
    Member
    Join Date
    Nov 2008
    Location
    USA
    Posts
    644
    Downloads
    0
    Uploads
    0

    Default Re: Turbo CAD to G code

    TurboCad is used to create the geometry that you are trying to cut out. Turbocad uses its own format to save files that most other programs can't read. Turbocad does have a cam program that allows you to directly go from design and create the gcode that Mach3 uses. or you can use other programs that takes the DXF from the CAD and convert them to gcode. So you would need to export a dxf out of Turbocad into one of these CAM programs, like cut2D or cambam, etc. then the CAM program posts to (Mach3) after you specify what cutter diameter, cut inside or outside of the line, what depth, speed, ect.
    Some programs offer free trials, some with their own geometry and some with your geometry. its always good to test before you buy, but its important that you be able to export DXF from the CAD program.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Turbo CAD to G code

Turbo CAD to G code