Need Help! Tree 425 A2100 RT board Bios


Results 1 to 1 of 1

Thread: Tree 425 A2100 RT board Bios

  1. #1
    Registered trans1978's Avatar
    Join Date
    Dec 2013
    Posts
    0
    Downloads
    0
    Uploads
    0

    Default Tree 425 A2100 RT board Bios

    Hello everybody,

    This is my first post on this forum and I am hoping someone will be able to help me.

    I made the mistake of replacing the Bios batteries in the A2100 boards. The WS board seems to be operating correctly but I believe the RT board is not. Before replacing batteries the machine had no errors on it, the only issue was the time resetting and it always loaded a known good program. I pulled the whole A2100 out of the machine put it on an antistatic pad, powered it up and replaced the batteries while I had power on. I thought this would help prevent loosing the bios settings, when everything was installed back into the machine I started it, set the time and date and thought everything was good. Everything came up as normal until an error came up of 40-33 output/fuse failure . From what I have found on the forums is this could be caused by the RT board, I pulled the RT board and installed a pci video card, monitor, wired in an AT power supply and used a ps/2 keyboard adapter to plug a keyboard into it. I wired the AT in from what I have seen in forums and pinouts for that style of power supply. I turned power on and get nothing, no video output. I am not sure if I need to do anything additional to get the RT board to power up. If you have any information that might help please let me know. I have pictures of how my WS board Bios settings were and have some of the RT bios setting I found online.

    Thank You

    1999 Tree 425
    RT board 3-424-2169A02
    Bridge Board 35980585
    A2100 Controls Version 3

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Tree 425 A2100 RT board Bios-rt-board-jpg  


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Tree 425 A2100 RT board Bios

Tree 425 A2100 RT board Bios