Need Help! J325 / DC310B / Unidrive SP problems


Results 1 to 1 of 1

Thread: J325 / DC310B / Unidrive SP problems

  1. #1
    Registered
    Join Date
    May 2018
    Location
    United States
    Posts
    0
    Downloads
    0
    Uploads
    0

    Default J325 / DC310B / Unidrive SP problems

    Hey Guys

    I've just picked up a Journeyman 325 with an updated Centroid DC310 / CNC10 Unix / Unidrive SP VFD

    Full disclaimer - I'm a N00B to CNC so apologize if I'm asking dumb questions.

    SO ... since dropping it in the shop I've had a bunch of teething problems ... sorted a few out - what I'm stuck on right now is the following.

    When I run a spindle autotune on the Unidrive ... everything appears to go smoothly, but at the end it displays a Trip 'et' error.

    The Unidrive manual has the following troubleshooting instructions, not sure what I need to look for for the line 3 & 4.

    Check terminal 31 signal = (Pr 8.10) ON
    Check value of Pr 10.32 = OFF
    Enter 12001 in Pr xx.00 and check for parameter controlling Pr 10.32 = ??
    Ensure Pr 10.32 or Pr 10.38 (=6) are not being controlled by serial comms = ??

    I have 2 wires coming from the Unidrive, Terminal 41 & 42 (drive healthy relay) which were hanging loose, if I look at the wiring diagram I have it appears these should go to the DC310b to Terminals H20 Spin Flt & In Common. If I attach these then I get a spindle fault error on the Centroid UI and I loose all drive functions. No XYZ jog etc ....

    J325 / DC310B / Unidrive SP problems-unidrive-wiring-jpg

    Any help much appreciated

    Thanks
    Jon


    Similar Threads:
    Attached Thumbnails Attached Thumbnails J325 / DC310B / Unidrive SP problems-unidrive-wiring-jpg  


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

J325 / DC310B / Unidrive SP problems

J325 / DC310B / Unidrive SP problems