any LA trade shows


Results 1 to 8 of 8

Thread: any LA trade shows

  1. #1
    Registered
    Join Date
    May 2003
    Posts
    267
    Downloads
    0
    Uploads
    0

    Default any LA trade shows

    Since I am new to CNC I would like to know if their are any trade shows in Los Angeles, CA area. I heard of one in Woodland Hills, CA (LA area). I think they called it WESTECH. Any show where I can see real CNC stuff at work is good.

    Thanks,

    Similar Threads:


  2. #2
    Moderator wms's Avatar
    Join Date
    Mar 2003
    Location
    United States
    Posts
    923
    Downloads
    0
    Uploads
    0

    Default Shows

    George,
    Sorry you just missed Westec it was last month.
    But there is the California machine tool show in Santa clara, on Sept. 9-11 call 800-878-2983 for info or www.amtda.org look under the trade show link.
    Also if you go to many of the machine tool dealers around LA they usually have machines set up to demo. I know all the HAAS factory outlets do demos. There is Haas demo days in June, check the Haas web site www.haasautomation.com to get more info. I'm sure the other machine makers have programs also.

    Last edited by wms; 06-25-2003 at 12:15 AM.
    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


  3. #3
    Community Moderator cadcam's Avatar
    Join Date
    Apr 2003
    Location
    United States
    Posts
    3543
    Downloads
    0
    Uploads
    0

    Default

    georgebarr here is one coming up . we will have a Mastercam booth there.

    I might see about a predator booth to.

    Westec would of been a good show for you.
    I worked the Predator booth had a good time.

    July 31 - August 3, 2003 AWFS - Woodworking show
    Anaheim Convention Center
    Anaheim, CA Booth #1263 CNC Software

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
    Cadcam
    Software and hardware sales, contract Programming and Consultant , Cad-Cam Instructor .


  4. #4
    Registered Jennifer's Avatar
    Join Date
    Jun 2003
    Location
    San Diego, CA
    Posts
    129
    Downloads
    0
    Uploads
    0

    Default

    I think I'll be at the Anaheim show - I'll stop by and say hello.

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


  5. #5
    Community Moderator cadcam's Avatar
    Join Date
    Apr 2003
    Location
    United States
    Posts
    3543
    Downloads
    0
    Uploads
    0

    Default

    Jen let me know what day so I can get you some lunch..
    When you figure the day out that is.

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
    Cadcam
    Software and hardware sales, contract Programming and Consultant , Cad-Cam Instructor .


  6. #6
    Registered Jennifer's Avatar
    Join Date
    Jun 2003
    Location
    San Diego, CA
    Posts
    129
    Downloads
    0
    Uploads
    0

    Default

    Sounds good - I'll, most likely, be there on Thursday the 31st - I'll let you know when it gets closer.

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


  7. #7
    Community Moderator cadcam's Avatar
    Join Date
    Apr 2003
    Location
    United States
    Posts
    3543
    Downloads
    0
    Uploads
    0

    Default

    Thanks , Jay

    I'll let you know when it gets closer.
    That will work just fine.

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
    Cadcam
    Software and hardware sales, contract Programming and Consultant , Cad-Cam Instructor .


  8. #8
    Registered hardmill's Avatar
    Join Date
    Mar 2003
    Location
    United States
    Posts
    499
    Downloads
    0
    Uploads
    0

    Default

    Originally posted by cadcam
    Thanks , Jay
    Poor cadcam, so overworked he's talking to himself

    PEACE



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

any LA trade shows

any LA trade shows

any LA trade shows