Need Help! FH630SX-i feedrate(G01) neglect


Results 1 to 3 of 3

Thread: FH630SX-i feedrate(G01) neglect

  1. #1
    Member seblars90's Avatar
    Join Date
    May 2020
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default FH630SX-i feedrate(G01) neglect

    We are running into an issue with our FH630 horizontal, and are unable to get any Toyoda support at the current time.

    Currently, we are getting results of any G01 fed move being overridden to the max allowable feed(400ipm).

    I.e. : programmed lined(G01X0.0F1.00) results in a fed move to "X0", but will not traverse at the designated "1.0"ipm, but overrides to 400ipm.

    I've attempted playing with the "m48/m49" to see if that had any effect, but had no success.

    Anyone have any ideas on what may have happened to cause this and a remedy for the situation?

    Thank you in advance for any support!

    Similar Threads:


  2. #2
    Member Species8472's Avatar
    Join Date
    Aug 2006
    Location
    usa
    Posts
    123
    Downloads
    0
    Uploads
    0

    Default Re: FH630SX-i feedrate(G01) neglect

    Is the spindle on when when you make this move? If so maybe you are in inch per rev. and not inch per minute.
    G95 inch per rev
    G94 inch per minuet

    "Teach the ignorant, care for the dumb, punish the stupid."


  3. #3
    Member
    Join Date
    Nov 2007
    Location
    Canada and Nothern ireland
    Posts
    351
    Downloads
    0
    Uploads
    0

    Default Re: FH630SX-i feedrate(G01) neglect

    f1.0 ? one inch per rev at what rpm ? that might be way over 400ipm already



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

FH630SX-i feedrate(G01) neglect

FH630SX-i feedrate(G01) neglect