Need Help! Toyoda FH63 Fanuc 16i


Results 1 to 2 of 2

Thread: Toyoda FH63 Fanuc 16i

  1. #1
    Registered
    Join Date
    Jan 2018
    Location
    Belgium
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Toyoda FH63 Fanuc 16i

    Hello,

    We have a Toyoda FH63 with a Fanuc 16i. If I turn my B-axis it seems it turns random. Is there a possibility that I can choose if it turns clockwise or counter-clockwise?

    Greetings
    Tom

    Similar Threads:


  2. #2
    Registered
    Join Date
    Apr 2011
    Location
    USA
    Posts
    439
    Downloads
    0
    Uploads
    0

    Default Re: Toyoda FH63 Fanuc 16i

    An overrun and a positioning direction are set by the parameter (No.
    5440). Even when a commanded positioning direction coincides with
    that set by the parameter, the tool stops once before the end point.
    G60, which is an one–shot G–code, can be used as a modal G–code in
    group 01 by setting 1 to the parameter (No. 5431 bit 0 MDL).
    This setting can eliminate specifying a G60 command for every block.
    Other specifications are the same as those for an one–shot G60 command.
    When an one–shot G code is sepcified in the single direction positioning
    mode, the one–shot G command is effective like G codes in group 01.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Toyoda FH63 Fanuc 16i

Toyoda FH63 Fanuc 16i