Need Help! Thermal problems


Results 1 to 4 of 4

Thread: Thermal problems

  1. #1
    Registered
    Join Date
    Apr 2018
    Location
    United States
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Thermal problems

    I have a Toyoda FA450 with a Fanuc 16i-MB. I am getting multiple operator alarm codes, one being a Coolant Unit Thermal trip (AL51). the others are Through coolant empty (AL53), Coolant empty (AL48) and a Take up chip conveyer alarm (AL83). Cleaned all coolant tanks and floats and filled. Hydraulics will not start up. Checked all breakers and switches. Anyone have any ideas???

    Similar Threads:


  2. #2
    Member
    Join Date
    Apr 2011
    Location
    USA
    Posts
    841
    Downloads
    0
    Uploads
    0

    Default Re: Thermal problems

    Looks like you may have lost the voltage that feeds the overloads. Check the votage at the overload AUX contacts and see if you have it.



  3. #3
    Registered
    Join Date
    Apr 2018
    Location
    United States
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: Thermal problems

    I forgot to mention that there is a spindle chiller on the machine and a Techie seems to think the alarms are related to the chiller not powering up.



  4. #4
    Member
    Join Date
    Jul 2017
    Location
    United States
    Posts
    50
    Downloads
    0
    Uploads
    0

    Default Re: Thermal problems

    Could be a thermal overload tripped inside the chiller unit it's self.

    Almost guaranteed to happen if you get a brownout where a phase or two isn't making it into the shop.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Thermal problems

Thermal problems