Need Help! X axis off from center of pallet rotation


Results 1 to 3 of 3

Thread: X axis off from center of pallet rotation

  1. #1
    Registered
    Join Date
    Aug 2016
    Location
    United States
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default X axis off from center of pallet rotation

    So I run a toyoda vf 60, and am boring a part 180 degrees apart on the B axis. My bores are coming out .002" offset. so if I put a .001" in the common offset they come out perfect. I am wondering if there is a parameter I can change to offset where machine X zero is to solve the problem for future machining?

    Similar Threads:


  2. #2
    Registered
    Join Date
    Aug 2016
    Location
    United States
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: X axis off from center of pallet rotation

    Oh and I am using the side of a tombstone and using Machine coordinates to machine my part. so one side would be X-15.2171 and the other X15.2171, thanks.



  3. #3
    Registered
    Join Date
    Aug 2016
    Location
    United States
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: X axis off from center of pallet rotation

    If anyone has any answers as to how I can solve this problem I would be greatly appreciative!



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

X axis off from center of pallet rotation

X axis off from center of pallet rotation