Round inserts on the 15L


Results 1 to 2 of 2

Thread: Round inserts on the 15L

  1. #1
    Member
    Join Date
    May 2015
    Location
    USA
    Posts
    17
    Downloads
    0
    Uploads
    0

    Default Round inserts on the 15L

    I recently bought a holder for round inserts that I intend to put in the turret and use for profiling smooth curves. I tried to set up the round tool in the offsets table and discovered that there are no round inserts shown, moreover, the new profile dialog in Path Pilot 2.0 forces you to define the shape of the insert, and there is no obvious way to designate a round insert. Any suggestions or experiences in using round inserts in the 15L?

    Similar Threads:


  2. #2
    Member
    Join Date
    May 2008
    Location
    Canada
    Posts
    666
    Downloads
    0
    Uploads
    0

    Default Re: Round inserts on the 15L

    I'm not sure, I'm not at the shop right now but, can you use a parting tool and put the radius on the tool offset table, just a guess.

    Jeff



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Round inserts on the 15L

Round inserts on the 15L