If you need flood cooling, that comes down from the front-center of the tray. You can't flood cool if it's not on a stand with raised bosses so the tubing can route down under it. If you use air or mist, it'll be fine anyway.
Also, the power draw bar uses a mechanical pneumatic button that you hold in while changing the tool, not an electric button that goes on/off. Not a big deal, but another difference from the bigger brethren.
Cast iron table is likely more rigid than a toolbox. The 440 stand is like a toolchest, but has additional flat steel bars that get clamped in to stiffen it up.