Need Help! DRY WAYS PCNC1100 Series One


Results 1 to 4 of 4

Thread: DRY WAYS PCNC1100 Series One

  1. #1
    Member
    Join Date
    May 2013
    Location
    USA
    Posts
    63
    Downloads
    0
    Uploads
    0

    Default DRY WAYS PCNC1100 Series One

    I'm not getting oil on my X or Y ways on my ancient 1100. Is there a series of pictures or a video showing how to get to the distribution blocks under the X? I'm assuming I'll have to remove the X axis as well. Thanks in advance.

    Similar Threads:


  2. #2
    Member
    Join Date
    Apr 2011
    Location
    USA
    Posts
    720
    Downloads
    0
    Uploads
    0

    Default Re: DRY WAYS PCNC1100 Series One

    I don't any specific advice to give you, but over the years there have been a number of threads on the forum about this issue, and folks have mentioned stuck and clogged check valves and such. My best advice is to search the forum for those threads.
    Good Luck
    Terry



  3. #3
    Member
    Join Date
    May 2013
    Location
    USA
    Posts
    63
    Downloads
    0
    Uploads
    0

    Default Re: DRY WAYS PCNC1100 Series One

    I searched using a gajillion key words and browsed the first 13 pages before asking the question. I know I saw a couple good threads on this, but it was many years ago.



  4. #4


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

DRY WAYS PCNC1100 Series One

DRY WAYS PCNC1100 Series One